IPS3110 Series

10-port 100M/Gigabit Layer 2 Unmanaged Industrial PoE Switch

 

 Support 2 gigabit Combo ports (SFP slot or RJ45) and 4/8 100M PoE copper ports


 The maximum power consumption of single PoE is 30W


 PoE could power device over Ethernet, thus decreasing the cable connection of powered devices


 Support dual power supply inputs, input voltage: 48VDC


 Support – 40~75℃ wide operating temperature range

IPS3110 series are 10-port 100M/gigabit layer 2 unmanaged industrial PoE Ethernet switches, and the PoE power supply is up to the protocol standard of IEEE 802.3af/at. This series have two types of product and provide 100M copper port, PoE copper port and gigabit Combo port (SFP slot or RJ45). They also adopt DIN-Rail mounting, which can meet the requirements of different scenes.


The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. The DIP switch could implement functions like Flow Control, Port Alarm, RJ45 Forced 10M, etc. The 4-PoE device also supports VLAN. When power supply or port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, rail transit, smart city, safety city, new energy, aerospace, intelligent manufacturing, military project and other industrial fields.

 

 

Standard

&

Protocol

 

 

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX 

IEEE 802.3z for 1000Base-X

IEEE 802.3ab for 1000Base-T

IEEE 802.3x for Flow Control

IEEE 802.3af for PoE

IEEE 802.3at for PoE+

 

 

PoE

 

The maximum power of PoE port: 30W

The power supply pin of PoE: V+, V+, V-, V- correspond to Pin 1, 2, 3, 6

Interface

 

100M copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning

Combo port: 10/100/1000Base-T(X) or 1000Base-FX

Alarm port: 2-pin 7.62mm pitch terminal blocks, support 1 relay alarm output, current carrying capacity is 1A@24VDC or 0.5A@120VAC

 

LED Indicator

 

Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator, PoE Indicator

 

Switch

Property

 

Transmission mode: store and forward

MAC address: 8K

Packet buffer size: 1Mbit

Backplane bandwidth: 7.6G

Switch time delay: <10μs

 

Power

Requirement

 

48VDC, 4-pin 7.62mm pitch terminal blocks

Dual power supply redundancy, reverse polarity protection

 

Environmental 

Limit

 

Operating temperature range: -40~75℃

Storage temperature range: -40~75℃

Relative humidity: 5%~95%(no condensation)

 

Physical Characteristic

 

Housing: IP40 protection, metal

Installation: DIN-Rail mounting

Dimension (W x H x D): 70mm×160mm×130mm

Weight: ≤1.07kg

 

Industrial

Standard

 

IEC 61000-4-2 (ESD), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV


EN61000-4-4 (EFT), Level 3

Power supply:±2kV

Ethernet port: ±2kV

Relay: ±2kV


IEC 61000-4-5 (Surge), Level 3

Power supply: common mode±2kV, differential mode±1kV

Ethernet port: ±2kV

Relay: common mode±2kV, differential mode±1kV


Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

 

Certification

 

CE, FCC, RoHS

 

Warranty

 

5 years

 

Available Models

 Gigabit Combo Port 

(SFP slot or RJ45)

100M Copper Port 100M PoE Copper Port Power Supply Range
IPS3110-2GC-8POE 2 0 8

48VDC

dual power supply

IPS3110-2GC-4T-4POE 2 4 4