RACK2000 Series

14/16-Slot Card/Desktop Media Converter Rack

 

 Support 14/16 slots, allows for centralized management of various media converter daughter cards 

 

 Support hot-plugging of media converter

 

 Support dual power supply, input voltage: 100~260VAC

 

 Support 0~50℃ wide operating temperature range

 

RACK2000 series are 14/16-slot card/desktop media converter racks. They could be inserted in up to 14/16 media converter devices and power them uniformly, thus reducing cables which is convenient for management and maintenance. This series have three types of product which could be used matching with various media converters. They provide 100M copper port, 100M fiber port, gigabit copper port and gigabit fiber port and adopt 2U rack mounting, which can meet the requirements of different scenes.


RACK2000 series media converter racks adopt dual power supply which could reduce the load of power supply and extend its service life. When one power supply fails, the other one could work independently, ensuring that converter could operate without interruption. When the power supply needs to be repaired or replaced, you don’t need to pull out the media converters or dismount this rack from equipment cabinet. All you need to do is to pull out the faulty power supply from the back of the rack and repair it or replace it, making maintenance extremely convenient and quick. The power supply has been fully shielded to prevent the electromagnetic signals it generated from interfering with the normal operation of modules. The switch power supply offers over-voltage and over-current protection. The output ripple and noise of power supply is less than 50mV.

 

Standard

&

Protocol

 

 

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX and 100Base-FX 

IEEE 802.3ab for 1000Base-T

IEEE 802.3z for 1000Base-X

IEEE 802.3x for Flow Control

 

Management

 

SNMP v1/v2, HTTP, FTP, TELENT

 

Interface

 

Copper port: 10/100Base-T(X) or 10/100/1000Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning

Fiber port:: 100Base-FX or 1000Base-FX, SC/ST/FC optional

Console port: CLI command line management port(RS-232), RJ45

 

LED Indicator

 

Running Indicator, Port Indicator, Power Supply Indicator, LFP Indicator, Duplex Mode Indicator

 

Power

Requirement

 

Input voltage: 100~260VAC, 50~60Hz

Output voltage: 5VDC

Single or dual power supply

 

 

Power

Consumption

 

Full-load: <60W

Environmental 

Limit

 

Operating temperature: 0~50℃

Storage temperature: -10~70℃

Relative humidity: 5%~95%(no condensation)

 

Physical Characteristic

 

Housing: metal

Installation: 2U rack mounting

Dimension (W x H x D): 

RACK2000A: 488mm×90mm×231mm

RACK2000B: 483.4mm×90.5mm×291.2mm

RACK2000C: 487mm×90mm×317mm

 

Certification

 

CE, FCC, RoHS

 

Warranty

 

3 years

 

 

RACK2000A

 

RACK2000B

 

RACK2000C

Available Models Slot Slot Type

 

Internet

 

 

Management 

 

Compatible Card Power Supply
 RACK2000A  14  Desktop  No

MODEL1100/MODEL3012/

MODEL277A/MODEL277B 

100-260VAC
 RACK2000B  16 Card   No  MODEL1100-C/MODEL3012-C
 RACK2000C  16 Card   Yes  MODEL1100M-C