Overview of 3onedata's 2 Port CAN Bus Device Server ICP222-2F-2CI
ICP222-2F-2CI is a CAN server that has integrated 2 CAN ports and 2 Ethernet ports internally. It can implement interconnection between CAN-Bus network and Ethernet network easily to further extend the communication range of CAN-Bus network. It supports 2 CAN to 2 100M Ethernet fiber port and adopts DIN-Rail mounting which can meet the requirements of different scenes.
CAN server supports various network protocols, such as TCP, UDP, TELNET, SW-Ring, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each CAN supports 4 TCP or UDP session connections and multiple operating modes like TCP Server, TCP Client, UDP and TCP Auto. Moreover, it supports WEB, TELNET, and other access modes. It can provide users with good experience via friendly design of network management system interface, simple and convenient operation.
DIP switch could implement restoring factory setting and accessing terminal resistor. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, building automation, healthcare automation system, measuring instrument and environment monitoring system, etc.
Additional Features
Support 2 100Base-FX Ethernet fiber ports
Support 5kbps~1000kbps line-speed non-blocking communication
Support multiple operating modes like TCP Server, TCP Client, UDP and TCP Auto
SW-Ring could implement network redundancy and prevent network storm
Support cross-gateway and cross-router communication
Support time setting for heartbeat and overtime disconnection, which can disconnect idle TCP automatically
Support CAN port status and parameter monitoring, making communication state clear to be seen
Support automatic reconnection from network interrupts to establish reliable TCP connection
Flexible CAN data framing setting can meet user’s various needs in data partition
TCP support multi-connection, which enables up to 4 users to monitor and manage CAN device simultaneously
Stand-alone or multi-device communication is supported in UDP mode, which enables multiple users to monitor or manage CAN device simultaneously
Support multiple configuration forms like Windows configuration tool, TELNET and WEB
| Ethernet | Standard: IEEE 802.3u for 100Base-FX Protocol: TCP, UDP, ARP, HTTP, SW-Ring, TELNET, ICMP, DHCP, DNS Port quantity: 2 Ring network configuration: single ring Transmission speed: 100M Interface form: SC/ST/FC Duplex mode: full duplex Transmission distance: Multimode: 2km Single mode: 20/40/60/80/100/120km
Transmission wavelength: Multimode: 1310nm Single mode: 1310nm or 1550nm
Operating mode: 4 sessions, support operating modes like TCP Server, TCP Client, UDP, TCP Auto, advanced TCP Server and advanced UDP |
| CAN Interface | Standard: CAN2.0A, CAN2.0B Interface quantity: 2 CAN ports CAN signal: CANH, CANL Duplex mode: 2-wire Half Duplex Mode Baud rate: 2.5kbps-1000kbps Load capacity: support concurrent transmitting of 110 nodes Transmission distance: 40m~10km Interface form: adopt 4-pin 5.08mm pitch terminal blocks Terminating resistor: optional external 120Ω terminating resistor Interface protection: 2kVAC isolation protection |
| Console Port | CLI command line management port (RS-232), RJ45 |
| Configuration Method | WEB configuration management, TELNET configuration, Windows configuration tool |
| Redundancy Technology | SW-Ring |
| LED Indicator | Power supply indicator, running indicator, Ethernet fiber port indicator, CAN port indicator |
| Power Requirement | 12~48VDC 3-pin 7.62mm pitch terminal blocks Support non-polar connection |
| Power Consumption | No-load: 2.81W@24VDC Full-load: 3.00W@24VDC |
| Environmental Limit | Operating temperature: -40~75℃ Storage temperature:-40~85℃ Relative humidity: 5%～95%(no condensation) |
| Physical Characteristic | Housing: IP40 protection, metal Installation: DIN-Rail mounting Dimension (W x H x D): 35mm×110mm×95mm Weight: 374g |
| Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge), Level 3 Air discharge: ±8kV Contact discharge: ±6kV
IEC 61000-4-4 (EFT, electrical fast transient), Level 4 Power supply: ±4kV
IEC 61000-4-5 (Surge), Level 3 Power supply: common mode±2kV, differential mode±1kV CAN port: common mode±2kV, differential mode±1kV
Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
| Certification | CE, FCC, RoHS |
| Warranty | 3 years |
| Available Models | 100M Fiber Port | CAN | Power Supply |
| ICP222-2F-2CI | 2 | 2 | 12~48VDC |
Supporting Document
ICP222-2F-2CI Datasheet
2022-10-10
ICP222-2F-2CI QIG
2022-10-10
