CP202-2CI-P(12-48VDC)

Wall Mounting
2-Port CAN Server

Support 2 CAN to 1 10/100Base-T(X) self-adaptive Ethernet interface

Support multiple operating modes like TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang and UDP Multicast

Support 5K~1000Kbps arbitrary baud rate

Support -40~75℃ wide operating temperature range

Introduction

CP202-2CI-P(12-48VDC) is a CAN server that has integrated 2 CAN ports and 1 Ethernet port. It can implement interconnection between CAN-Bus network and Ethernet to further extend the communication range of CAN-Bus network. This product supports 2 CAN to 1 100M Ethernet copper port and adopts wall mounting which can meet the requirements of different scenes.

Can server supports multiple network protocols, such as TCP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each can port supports 4 TCP or UDP session connections, and it also supports TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang, UDP Multicast operating modes and TELNET, WEB access modes. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

Setup button can achieve the device restore factory defaults. DIP switch can add terminal resistance of CAN Port. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Technical Specifications

Ethernet

Standard: 10Base-T, 100Base-TX

Protocol: TCP, UDP, ARP, HTTP, TELNET, ICMP, DHCP, DNS

Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning

Interface quantity: 1

Interface form: RJ45

Duplex mode: Full/Half Duplex Mode Self-adaption

Operating mode: 4 sessions, support operating modes like TCP

Server, TCP Client, UDP Server, UDP Client, UDP

Rang and UDP Multicast

CAN Interface

Standard: CAN2.0A, CAN2.0B

Interface quantity: 2 CAN ports

CAN signal: CANH, CANL

Duplex mode: 2-wire Half Duplex Mode

Baud Rate:5/10/20/50/100/125/250/500/800/1000kbps

Load capacity: support concurrent transmitting of 110 nodes

Transmission distance: 40m~10km

Interface form: adopt 6-pin 5.08mm pitch terminal blocks

Terminating resistor: optional external 120Ω terminating resistor

Interface protection: 2kVAC isolation protection

Configuration Method

WEB configuration management, TELNET configuration, Windows configuration tool

Security

Classification of User Permissions, IP Address Filtering, MAC Address Filtering

Indicator

Power supply indicator, network connection indicator, system running indicator, CAN status indicator, CAN error indicator

Power Supply

12~48VDC, 3-pin 5.08mm pitch terminal blocks, support non-polarity

Power Consumption

No-load: 1.00W@12VDC

Full-load: 1.10W@12VDC

Working Environment

Operating temperature: -40~75℃

Storage temperature:-40~85℃

Relative humidity: 5%~95%(no condensation)

Physical Characteristic

Housing: IP40 protection, metal

Installation: wall mounting

Dimension (W x H x D): 97mm×110mm×25mm

Weight: 287g

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

Air discharge:± 8kV

Contact discharge: ±6kV


IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3

Power supply: ±2kV

Ethernet port: ±1kV

CAN port: ±2kV


IEC 61000-4-5 (Surge), Level 3

Power supply: common mode±2kV, differential mode±1kV

Ethernet interface: ±2kV

CAN port: common mode±2kV, differential mode±1kV


Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Authentication

CE, FCC, RoHS certification

Warranty

3 years

Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More