ICS5428 Series
28-port Gigabit /10Gigabit Layer 3 Industrial Ethernet Switch
Support 4 10Gigabit SFP+ slots, 8 Gigabit COMBO (SFP slots or RJ45), 16 Gigabit copper ports
Adopt Ring patented technology, support single ring, coupling ring, chain, Dual-homing function
Support ERPS and loop detection, which can eliminate loop effectively and prevent broadcast storm caused by data loop
10 Gigabit bandwidth can transmit large amounts of video, voice and data with high performance and high speed
DC product supports 2*24/48VDC (18~72VDC) redundant power inputs
AC product supports 2*110/220VAC (85~264VAC/DC) power supply inputs
Support -40~75℃ wide temperature operation
Introduction
ICS5428 series is 28-port Gigabit/10 Gigabit layer 3 industrial Ethernet switch. It provides 10 Gigabit SFP+ slots, Gigabit copper ports and Gigabit COMBO ports. It adopts 1U rack mounting. Abundant numbers of interfaces, bandwidth of Gigabit/10Gigabit combination and ability to transmit large amounts of video, voice and data with high performance and high speed meet the application requirements of large-scale industrial network.
Network management system supports various network protocols and industrial standards, such as Static Routing, RIP, VRRP, NAT, STP/RSTP/MSTP, GMRP, EPRS, 802.1Q VLAN, QoS, DHCP Server, DHCP Client, IGMP Static Multicast, LLDP, Port Trunking, Port Mirroring, etc. It also possesses complete management functions, including Port Configuration, Port Statistics, Port IP Binding, Access Control, 802.1X Authentication, Network Diagnosis, Rapid Configuration, Online Upgrading and so on; and supports CLI, HTTP, HTTPS, Telnet, SSH and other access methods., Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
RESET button can reboot the device and restore factory defaults. This product supports optional dual AC/DC power supply. The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.
Technical Specifications
Standard & Protocol | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE802.3ae for 10GBase-X SFP+ IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol ITU-T G.8032 for ERPS IEEE 802.1Q for VLAN IEEE 802.1p for CoS IEEE 802.1AB for LLDP IEEE 802.3ad for LACP |
Management | SNMP v1/v2c/v3 Centralized Management of Equipment, QoS, DHCP Server, DHCP Snooping, DHCP Relay, Static MAC Address, LLDP, Storm Suppression, User Password, Login Method, File Management, Log Management, Port Statistics |
Security | User privilege classification, ACL, SSH/HTTPS protocol authorization, link flapping protection, port loop detection, access control, SNMP, RMON, IPDT, IPv6DT, Smart-Link, NAT, port alarm, power alarm, temperature alarm, network load alarm |
Switch Function | 802.1Q VLAN, MAC, static aggregation, LACP, ARP, storm suppression |
Unicast / Multicast | IGMP-Snooping, MLD-Snooping, GMRP, IGMP, MLD, PIM-SM, PIM-DM, IPv6-PIM-SM, IPv6-PIM-DM |
Redundancy Technology | Ring, MRP, STP/RSTP/MSTP, ERPS |
Troubleshooting | Ping, Traceroute, Network Cable Diagnosis, SFP Digital Diagnosis |
Routing Technique | RIP, RIPng, OSPF, OSPFv3, ISIS, VRRP, IPv6 VRRP, BGP |
Time Management | NTP, Time Zone Configuration |
Interface | Gigabit copper port: 10/100/1000Base-T(X) self-adaptive RJ45, automatic flow control, support full/half duplex mode, MDI/MDI-X self-adaption 10Gigabit SFP+: 1G/2.5G/10GBase-X self-adaptive SFP+ slot Combo port: 10/100/1000Base-T(X) RJ45 or 100/1000Base-X SFP slot Console port: CLI command line management port(RS-232), RJ45 Alarm port: 2 5-pin 5.08mm pitch terminal blocks(relay occupies 2 pins), support 2 relay alarm outputs, current loading capacity is 2A@30VDC or 2A@220VAC |
Indicator | Power indicator, running indicator, alarm indicator, interface indicator |
Switch Property | Transmission mode: store and forward MAC address: 16K Buffer: 12Mbit Backplane bandwidth: 128Gbps Switch time delay: <10μs |
Power Supply | DC products: l Input voltage: 24/48VDC (18~72VDC) l Redundant power supply: support dual power supply redundancy l Connection protection: anti-reverse connection l Access terminal: 5-pin 5.08mm pitch terminal blocks (power supply occupies 2 pins)
AC products: l Input voltage: 110/220VAC (85~264VAC/DC) l Access terminal: single-phase socket with rocker switch |
Power Consumption | ICS5428-16GT8GC4XS-2LV: l No-load at normal temperature: 9.39W@48VDC l Full-load at normal temperature: 26.35W@48VDC l Full-load at high temperature: 29.07W@48VDC
ICS5428-16GT8GC4XS-2HV: l No-load at normal temperature: 9.76W@220VAC l Full-load at normal temperature: 27.38W@220VAC l Full-load at high temperature: 30.25W@220VAC |
Working Environment | Operating temperature: -40~75℃ Storage temperature: -40~85℃ Relative humidity: 5%~95% (no condensation) |
Mechanical Structure | Housing: IP40 protection, metal Installation: 19-inch 1U rack mounting Dimension (W x H x D): 482.6mm×44mm×300mm Weight: l ICS5428-16GT8GC4XS-2LV: 3.933kg l ICS5428-16GT8GC4XS-2HV: 3.747kg |
Industrial Standard | IEC 61000-4-2 (ESD, electronic static discharge), Level 4 l Air discharge: ±15kV l Contact discharge: ±8kV
IEC 61000-4-4 (EFT, electrical fast transient), Level 4 l Power supply: ±4kV l Ethernet interface: ±2kV l Relay: ±2kV
IEC 61000-4-5 (Surge), Level 4 l Power supply: common mode ±4kV, differential mode ±2kV l Ethernet interface: common mode±4kV l Relay: common mode ±4kV, differential mode ±2kV
Shock: IEC 60068-2-27 Free fall: IEC 60068-2-31 Vibration: IEC 60068-2-6 |
Authentication | CE, FCC, RoHS |
Warranty | 5 years |
Ordering Information
ICS5428-16GT8GC4XS-2LV
Gigabit Copper Port
16
Gigabit COMBO Port
8
10 Gigabit SFP+ Slot
4
Power Supply
2*24/48VDC (18~72VDC) redundant power supply input
ICS5428-16GT8GC4XS-2HV
Gigabit Copper Port
16
Gigabit COMBO Port
8
10 Gigabit SFP+ Slot
4
Power Supply
2*110/220VAC (85~264VAC/DC) power supply input
Documentation & Downloads
Recommended Products
ICS5556 Series
56-Port Gigabit /10Gigabit Modular Layer 3 Industrial Ethernet Switch
ICS5400 Series
28/32/36/44-Port Gigabit/10Gigabit Layer 3 Industrial Ethernet Switch
MES5400 Series
30-port Gigabit/10Gigabit Modular Layer 3 Industrial Ethernet Switch
ICS5400TSN-24GT16GS4XS
44-Port Gigabit /10Gigabit Layer 3 TSN Industrial Ethernet Switch
Make an appointment with an expert to receive a free assessment of your industrial network needs










