Standard & Protocol | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3z for 1000Base-X IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control |
Interface | Copper port: 10/100Base-T(X) or 10/100/1000Base-T(X), RJ45, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning 1×9 fiber port: 100Base-FX or 1000Base-FX SFP slot: 1000Base-X, SFP slot |
Indicator | STA Running Indicator, Port Indicator, LFP Indicator(1 copper port 1 fiber port product only) |
Switch Property | Transmission mode: store and forward Switch time delay: <10μs 100M Products: MAC address: 2K Packet buffer size: 0.75M Backplane bandwidth: 0.8G Gigabit Products: MAC address: 8K Packet buffer size: 1M Backplane bandwidth: 14G |
Power supply | Input voltage: 5VDC |
Power consumption | No-load: ≤1.5W@5VDC Full-load: ≤2.0W@5VDC |
Working environment | Operating temperature: -40~75℃ Storage temperature:-40~85℃ Relative humidity: 5%~95%(no condensation) |
Physical Characteristic | Installation: slide-in mounting Weight: ≤80g Dimension (W x H x D): 84.5mm×20.0mm×122.5mm |
Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge) Air discharge: ±8kV Contact discharge: ±6kV IEC 61000-4-4 (EFT, electrical fast transient pulses) Power supply: ±2kV Signal: ±1kV IEC 61000-4-5 (Surge) Power supply: common mode±2kV, differential mode±1kV Signal: common mode ±2kV, differential mode ±1kV |
Certification | CE、FCC、RoHS certification |
Warranty | 3 years |
Available Models | 100M Copper Port | Gigabit Copper Port | 100M Fiber Port | Gigabit Fiber Port | Gigabit SFP | Power Supply |
ECU100M-1T1F | 1 | — | 1 | — | — | 5VDC |
ECU100M-2T1F | 2 | — | 1 | — | — | |
ECU100M-1GT1GF | — | 1 | — | 1 | — | |
ECU100M-2GT1GF | — | 2 | — | 1 | — | |
ECU100M-1GT2GS | — | 1 | — | — | 2 |