IGW1111/IGW1112/IGW1114 Series
DIN-Rail Mounting
1/2/4 RS-232/485/422 + 2 100M Ethernet Ports Modbus Gateway
Support 1/2/4 3IN1 serial ports and 2 10/100Base-T(X) self-adaptive Ethernet interfaces
Support conversion between Modbus RTU/ASCII and Modbus TCP protocol
Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes
Support virtual and real ID mapping to achieve flexible access between Master and Slave devices
Support network modes such as redundant mode, switching mode and dual IP mode to meet the needs of various network environments
Support 12~48VDC dual power supply inputs
Support -40~75℃ wide operating temperature range
Introduction
IGW1111/IGW1112/IGW1114 series are Modbus gateways designed for integrating Modbus RTU/ASCII and Modbus TCP networks; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocols. This series provide 3 types of products and support 1/2/4 3IN1 serial ports and 2 100M Ethernet copper ports. They adopt DIN-Rail mounting to meet the requirements of different application scenes.
Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, HTTPS, SNMP, SSH,SMTP, SNTP,DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 256 Modbus TCP client (master) accesses and connects up to 128 Modbus TCP server (slave) devices. TELNET, WEB, SSHD and other access modes are also supported. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.
RESET button or DIP switch can achieve restoring factory defaults of the device. Each serial port of the device with single-port isolation is equipped with an exclusive isolation component, which can effectively avoid the impact of electromagnetic interference. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.
Technical Specifications
Ethernet | Standard: 10Base-T, 100Base-TX Protocol: Modbus TCP, TCP, IP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning Interface quantity: 2 Interface form: RJ45 Duplex mode: Full/Half Duplex Mode Self-adaption | ||
Serial Port | Standard: EIA RS-232C, RS-485, RS-422 Protocol: Modbus RTU/ASCII Quantity of serial port: 1/2/4 3IN1 serial ports RS-232 signal: DCD, DSR, RTS, GND, TXD, RXD, CTS, DTR RS-485 signal: D+, D-, GND RS-422 signal: T+, T-, GND, R+, R- Baud rate: 110bps-15200bps (customizable110bps-921600bps) Data bit: 7bit, 8bit Parity bit: None, Even, Odd, Space, Mark Stop bit: 1bit, 2bit Interface form: DB9(Male) Directional control: RS-485 direction adopts Automatic Data Direction Control technology Pull high/low resistor for RS-485: 4.7kΩ Electromagnetic isolation strength: 3KVDC/2KVrms Operating mode: RTU Master, RTU Slave, ASCII Master and ASCII Slave Connection quantity: support up to 256 Modbus TCP client (master) accesses and connect up to 128 Modbus TCP server (slave) devices. | ||
Configuration Method | WEB configuration management, TELNET configuration, Windows configuration tool, SSHD configuration | ||
Security | User right classification, IP address filtering, MAC address filtering, SNMP/ Mail /System Log alarm, HTTP/HTTPS/SSHD/TELNET access control | ||
Indicator | Power supply indicator, running indicator, Ethernet port indicator, serial port indicator | ||
Power Supply | 12~48VDC, 6-pin or 8-pin 5.08mm pitch terminal blocks, power supply occupies 4 pins in the left Power supply nonpolarity, dual power supply redundancy | ||
Power Consumption | Available Models | No-load (high temperature) | Full-load (high temperature) |
IGW1111-1DI(3IN1)-DB | 1.3W@12V | 1.6W@12V | |
IGW1112-2DI(3IN1)-DB | 1.7W@12V | 2.0W@12V | |
IGW1114-4DI(3IN1)-DB | 1.9W@12V | 2.4W@12V | |
Working Environment | Operating temperature: -40~75℃ Storage temperature: -40~85℃ Relative humidity: 5%~5%(no condensation) | ||
Physical Characteristic | Housing: IP40 protection, metal Installation: DIN-Rail mounting IGW1111/IGW1112 Series Dimension (W x H x D): 33mm×138mm×110mm Weight:≤ 500g IGW1114 Series Dimension (W x H x D): 53mm×138mm×110mm Weight: ≤ 640g | ||
Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge), Level 3 Air discharge: ±8kV Contact discharge: ±6kV IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3 Power supply: ±2kV Signal: ±1kV IEC 61000-4-5 (Surge), Level 3 Power supply: common mode±2kV, differential mode±1kV Signal: common mode ±1kV, differential mode ±1kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 | ||
Authentication | CE, FCC, RoHS | ||
Warranty | 3 years | ||
Ordering Information
IGW1111-1DI(3IN1)-DB
100M Copper Port
2
3IN1(RS-232/485/422)
1
Power Supply
12~48VDC
dual power supply
IGW1112-2DI(3IN1)-DB
100M Copper Port
2
3IN1(RS-232/485/422)
2
Power Supply
12~48VDC
dual power supply
IGW1114-4DI(3IN1)-DB
100M Copper Port
2
3IN1(RS-232/485/422)
4
Power Supply
12~48VDC
dual power supply
Documentation & Downloads
Make an appointment with an expert to receive a free assessment of your industrial network needs










