IES6300TSN-8GT2GS-2LV
DIN-Rail Mounting
10-Port Gigabit Layer 2 Managed Industrial Ethernet Switch
Support 8 Gigabit copper ports and 2 Gigabit SFP slots
Support Precision Time Protocol (PTP), provide sub-microsecond synchronization accuracy to meet requirements for high-precision time synchronization
Support TSN (time sensitive networking) protocol standards such as IEEE802.1Qbv, IEEE802.1Qav and IEEE802.1AS, which can provide deterministic transmission with low delay and high reliability for data
Adopt SW-Ring patented technology, support single ring, coupling ring, chain, Dual-homing, automatic recovery time of network failure < 20ms
Support dual power supply, input voltage: 9~60VDC
Support -40~75℃ wide operating temperature range
Introduction
IES6300TSN-8GT2GS-2LV is 10-port Gigabit layer 2 managed industrial Ethernet switch. This product provides Gigabit copper ports and Gigabit SFP slots, and it adopts DIN-Rail mounting which can meet the requirements of different scenes.
Network management system supports various network protocols and industrial standards, such as PTP, TSN, STP/RSTP/MSTP, ERPS, 802.1Q VLAN, QoS, IGMP Snooping, LLDP, DHCP Server, DHCP-Snooping, Port Trunking, Port Mirroring. It also possesses complete management functions, including Port Configuration, Port Isolation, Port Statistics, Access Control, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SSH, SNMP and other access methods. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
The design of DIP switch could implement device factory setting recovery. The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply, port or other configurable event has failure or alarm, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart city, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.
Technical Specifications
Standard & Protocol | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN IEEE 802.1p for CoS IEEE 802.1AB for LLDP IEEE 802.3ad for LACP IEEE 1588 for PTP IEEE 802.1AS for gPTP IEEE802.1Qbv, IEEE 802.1Qav for TSN |
Management | SNMP v1/v2c/v3 Centralized Management of Equipment, DHCP Server, Port Mirroring(TX,RX,TX&RX), QoS, LLDP, File Management, Log Management, Syslog Server, Port Statistics |
Security | Classification of User Permissions, Access Control, Port Alarm, Temperature Alarm, Power Supply Alarm, Network Load Alarm, Error Frame Alarm, Discarded Frame Alarm, Trap Alarm, Relay Alarm, E-mail Alarm, SSH Configuration, Telnet Configuration, HTTP Configuration, HTTPS Configuration, DHCP-Snooping, Loop Detection |
Switch Function | 802.1Q VLAN, Port Static/Dynamic Aggregation, Bandwidth Management, Flow Control, Port Rate Limit, Port Isolation |
Redundancy Technology | Ring, STP/RSTP/MSTP, ERPS |
Troubleshooting | Ping, Traceroute, Cable Diagnosis, SFP DDM |
Time Management | NTP server, NTP client, PTP, TSN |
Interface | Gigabit copper port: self-adaptive 10/100/1000Base-T(X) RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning Gigabit SFP: 1000Base-X SFP slot TF card slot (reserved): 1 TF(Micro SD) card slot, reserved Alarm port: 1 relay alarm output, 6-pin 5.08mm pitch terminal blocks, relay occupies the right 2 pins, current carrying capacity is 1A@30VDC or 0.3A@125VAC Console port: CLI command line management port(RS-232), RJ45 |
Indicator | RUN indicator, ALM indicator, power supply indicator, interface indicator |
Switch Property | Transmission mode: store and forward MAC address: 16K Buffer: 2Mbit Backplane bandwidth: 20G Switch time delay: <10μs |
Power Supply | 9~60VDC, support dual power supply redundancy, non-polarity, using 6-pin 5.08mm pitch terminals (the power supply occupies the left 4 pins) |
Power Consumption | No-load: 4.3W@48VDC (normal temperature), 4.9W@48VDC (high temperature) Full-load: 6.8W@48VDC (normal temperature), 7.8W@48VDC(high temperature) |
Working Environment | Operating temperature: -40~75℃ Storage temperature:-40~85℃ Relative humidity: 5%~95% (no condensation) |
Physical Characteristic | Housing: IP40 protection, metal Installation: DIN-Rail mounting Dimension (W x H x D): 53mm×138mm×110mm Weight: 0.6kg |
Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge), Level 3 Air discharge:± 8kV Contact discharge: ±6kV IEC 61000-4-4 (EFT, electrical fast transient), Level 3 Power supply: ±2kV Signal: ±1kV IEC 61000-4-5 (Surge), Level 3 Power supply: differential mode±1kV, common mode±2kV Signal: differential mode±1kV, common mode±2kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Authentication | CE, FCC, RoHS |
Warranty | 5 years |
Documentation & Downloads
Recommended Products
IES6300PRO Series
DIN-Rail Mounting
12/20-Port Gigabit Layer 2 Managed Industrial Ethernet Switch
IES6200-PN-16T4GS-2P48
DIN-Rail Mounting
20-Port 100M/Gigabit Layer 2 Managed PROFINET Industrial Ethernet Switch
ICS5400TSN-24GT16GS4XS Series
19-inch 1U Rack Mounting
44-Port Gigabit /10Gigabit Layer 3 TSN Industrial Ethernet Switch
Make an appointment with an expert to receive a free assessment of your industrial network needs










