IRT2000-A1-1T1D-12-LV
Rail Mounted/wall Mounted Installation
Industrial Grade 4G Wireless Router
Supports 1 100Mbps LAN port, 1 RS-232/485 serial port, 2 external antenna interfaces (1 4G antenna, 1 WIFI antenna interface), 1 SIM/UIM card slot, etc
Supports 4G all network connectivity, with cellular wireless network standards including FDD-LTE/TDD-LTE/WCDMA/EDGE/GPRS/GSM
Supports link backup, 4G/WiFi, and wired Ethernet link switching
Supports OpenVPN client, IPsec, PPTP/L2TP, GRE, N2N, and provides powerful data security mechanisms
Support input voltage: 6-35VDC, low-power design, suitable for different on-site power supply methods
No fan design, metal casing
Support -30~75℃ wide operating temperature range
Introduction
The IRT2000-A1-1T1D-12-LV industrial grade wireless 4G router is a single port, cost-effective domestic all network industrial grade router that uses 4G//Wi Fi high-speed wireless network as the data carrier network, providing secure and high-speed wireless connection between remote devices and sites. No matter where you are, your device can quickly access the Internet with the help of 4G/Wi Fi networks all over the world.
This industrial grade wireless router meets the needs of industrial users with low power consumption, operating temperatures up to -30 ℃~75 ℃, small size, light weight, strict EMC indicators, and can meet the network communication needs in harsh temperature, humidity, and electromagnetic interference environments. It is an ideal choice for industrial applications. Simultaneously equipped with VPN function, it provides multiple VPN encryption modes such as IPSec, L2TP, GRE, etc., allowing device data to be transmitted in a secure data channel, preventing data from being accessed and tampered with, and providing higher security for network applications. It can be widely used in various industries such as rail transit, security, smart cities, comprehensive pipe galleries, production automation, and smart light poles.
Technical Specifications
Standard & Protocol | Wireless LAN, following IEEE802.11b/g/n Wireless security, following IEEE802.11i 10Base-T, following IEEE 802.3 100Base TX, following IEEE 802.3u |
Cellular Network | 2G/3G/4G/Cellular network LTE FDD: B1/B3//B7/B8/B20/B28A LTE TDD: B38/B40/B41 WCDMA: B1/B8 GSM: B3/B8 |
Transmitted Power | GSM/GPRS power level: --GSM850:4(2W) --EGSM900:4(2W) --DCS1800:1(1W) --PCS1900:1(1W) EDGE power level: --GSM850: E2(0.5W) --EGSM900: E2 (0.5W) --DCS1800:E1(0.4W) --PCS1900: E1(0.4W) UMTS power level: --WCDMA :3 (0.25W) LTE power class:3 (0.25W) |
Receive Sensitivity | Frequency:GSM850@-109dBm(typical) Frequency:EGSM900@-109dBm(typical) Frequency:DCS1800@-109dBm(typical) Frequency:PCS1900@-109dBm(typical) Frequency:WCDMA B1@-110dBm(typical) Frequency:WCDMA B2@-110dBm(typical) Frequency:WCDMA B5@-110dBm(typical) Frequency:WCDMA B8@-110dBm(typical) LTE FDD@-97 dBm |
Network Access | APN, VPDN |
Access authentication | CHAP/PAP/MS-CHAP/MS-CHAPV2 |
LAN Protocol | ARP, Ethernet |
WAN Protocol | Static IP, DHCP, PPPoE |
VLAN | VLAN management |
IP Applications | Ping, Traceroute, DHCP Server/Client, DNS Relay, Dynamic DNS, Telnet, SSH, HTTP, HTTPS, TFTP, FTP, SFTP, NAT |
IP Routing | Static routing |
VPN | IPsec, L2TP/PPTP, GRE, OpenVPN, N2N |
Firewall | NAT, PAT, DMZ, port mapping IP filtering, port filtering, MAC filtering |
Link Backup | Link switching for 4G wireless networks, Wi Fi, and wired Ethernet |
Link Detection | TCP/Ping heartbeat detection, VPN link detection, automatic connection when disconnected |
QoS | Uplink and downlink bandwidth limitations |
Embedded Watchdog | Self inspection of equipment operation and self repair of equipment operation faults |
DTU | Built in software DTU function |
Traffic Statistics | Real time traffic statistics Monthly traffic statistics Traffic limit setting |
Timed Tasks | Timed restart |
SNMP | SNMP v1/v2 |
Configuration Maintenance | Web Management Telnet and SSH terminals System status monitoring NTP client, supporting device system clock network synchronization Configure import and export Network tools: Ping, Tracert |
Firmware Management | Firmware upgrade, supports local (HTTP/serial) and remote upgrades |
Event Alarm | System logs, application logs |
Processor | Industrial grade 32-bit processor |
Operating System | Linux system |
Serial Port Parameters | 5PIN terminal interface, 1 * RS232, 1 * RS485 |
Interface | Ethernet interface: 1 100Mbit LAN 10/100Mbit/s adaptive, built-in 1.5KV electromagnetic isolation protection Antenna interface: 2 external antenna interfaces (standard SMA female, characteristic impedance 50 ohms), 1 4G antenna, 1 Wi Fi antenna SIM/UIM card interface: Standard drawer type interface, supporting 1.8V/3V SIM/UIM cards, built-in 15KV ESD protection |
Reset Button | Through this button, the device's parameter configuration can be restored to the factory values |
Real Time Clock | Built in RTC, battery powered |
WIFI | Supports IEEE 802.11n b/g/n 2.4GHz Support AP/Client mode Supports open systems, shared keys, and WPA/WPA2 authentication Support WEP/TKIP/AES encryption |
Indicator Light | Power indicator light, ETH indicator light, system indicator light, network indicator light |
Source | Interface: Terminal power socket, built-in power reverse protection and overvoltage protection Standard power supply: DC 12V/1A Power supply range: DC6~35V |
Power Dissipation | Maximum power consumption: 2.4W Idle working current: 120mA@12VDC Average working current: 150mA@12VDC |
Work Environment | Working temperature: -30~75 ℃ Storage temperature: -40~85 ℃ Relative humidity: 5%~95% (no condensation) |
Mechanical Properties | Shell: IP30 protection level, metal shell Dimensions (width x height x depth): 100mm x 22mm x 78mm (excluding antenna and mounting parts) Installation method: rail mounted/wall mounted installation Weight: ≤ 210g |
Industry Standards | IEC 61000-4-2 (ESD, electrostatic discharge immunity), Level 3 Air discharge: ± 8kV Contact discharge: ± 6kV IEC 61000-4-4 (EFT, Electrical Fast Transient Burst Immunity), Level 3 Power supply: ± 2kV Ethernet interface: ± 1kV IEC 61000-4-5 (Surge, Level 3) Power supply: common mode ± 2kV, differential mode ± 1kV Ethernet interface: common mode ± 2kV, differential mode ± 1kV Impact: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Authentication | CE, FCC, RoHS |
Warranty | 5 years |
Documentation & Downloads
Recommended Products
IES1100 Series
24-Port Layer 2 Unmanaged Industrial Ethernet Switch
IES6300 Series
10/12-Port Layer 2 Managed Industrial Gigabit Ethernet Switch (Optional PoE or I/O)
IES6316-8GT8GS Series
16-Port Gigabit Layer 2 Managed Industrial Ethernet Switch
IES6116 Series
16-Port 100M Layer 2 Managed Industrial Ethernet Switch
Make an appointment with an expert to receive a free assessment of your industrial network needs










