IES1100 Series
24-Port Layer 2 Unmanaged Industrial Ethernet Switch
Support 24 100M Ethernet ports (optional fiber/copper ports)
Support relay alarm output
Support 18~72VDC power supply input, support dual power supply redundancy and nonpolarity
Support 85~264VAC/DC power input, support dual power supply redundancy
Support -40~75℃ wide operating temperature range
Support IP40 protection grade
Introduction
IES1100 series products are 24-port layer 2 unmanaged industrial Ethernet switches. This series of products provide 100M copper port and 100M fiber port. A variety of different fiber/copper port combination schemes can be selected. Support 18~72VDC or 85~264VAC/DC power supply scheme(optional), and adopt rack installation mode, which can meet the requirements of different application sites.
RESET button can reboot the device. The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The hardware adopts fanless, low power consumption and wide temperature design, which has passed rigorous industrial standard tests, and suits the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, new energy storage, new energy, smart mining, smart motorway, intelligent manufacturing and other industrial fields.
Technical Specifications
Standard & Protocol | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-X |
Interface | 100M copper port: 10/100Base-T(X) self-adaption, RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/ MDI-X Autotunning 100M fiber port: 100Base-FX, SC connector Relay: support 2 relay alarm outputs, and adopt 2 5-pin 5.08mm pitch terminal blocks. Relay occupies the right 2 pins, the current carrying capacity is 1A@30VDC or 0.3A@125VAC CONSOLE port: CLI command line management port(RS-232), RJ45 |
Indicator | Power indicator, running indicator, alarm indicator, interface indicator |
Switch Property | Transmission mode: store and forward MAC address: 16K Packet buffer size: 4Mbit Backplane bandwidth: 12.8Gbps Switch delay: <10μs |
Power Supply | IES1100-24T-2LV, IES1100-22T2F-2LV, IES1100-20T4F-2LV, IES1100-24F-2LV l Input voltage: 24VDC/48VDC (18~72VDC) l Power supply quantity: dual power supply redundancy l Connection method: 2 5-pin 5.08mm pitch terminal blocks (includes 3-pin power supply on the left side) l Connection protection: non-polarity
IES1100-24T-2HV, IES1100-22T2F-2HV, IES1100-20T4F-2HV, IES1100-24F-2HV l Input voltage: 110VAC/DC, 220VAC/DC (85~264VAC/DC) l Power supply quantity: dual power supply redundancy l Connection method: 2 5-pin 5.08mm pitch terminal blocks (includes 3-pin power supply on the left side) |
Power Consumption | ModelNo-loadFull-loadIES1100-24T-2LV4.5W@48VDC10.8W@48VDCIES1100-24T-2HV7.3W@220VAC11.7W@220VACIES1100-22T2F-2LV5.3W@48VDC7.1W@48VDIES1100-22T2F-2HV8.4W@220VAC11.9W@220VACIES1100-20T4F-2LV6.6W@48VDC8.6W@48VDCIES1100-20T4F-2HV10.0W@220VAC12.2W@220VACIES1100-24F-2LV22.1W@48VDC22.7W@48VDCIES1100-24F-2HV22.7W@220VAC24.7W@220VAC
|
Working Environment | Operating temperature: -40~75℃ Storage temperature:-40~85℃ Relative humidity: 5%~95% (no condensation) |
Mechanical Structure | Housing: IP40 protection, metal Installation: 19-inch 1U rack mounting Dimension (W x H x D): 440mm×44mm×207mm (lugs are not included)
Weight: l IES1100-24T-2LV is 2.31kg l IES1100-24T-2HV is 2.62kg l IES1100-24F-2LV is 2.42kg l IES1100-24F-2HV is 2.659kg |
Industrial Standard | IEC 61000-4-2 (ESD, electronic static discharge), Level 4 l Contact discharge: ±8kV l Air discharge: ± 15kV
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 4 l Power supply: ±4kV l Copper port: ±2kV l Relay: ±4kV
IEC 61000-4-5 (Surge), Level 4 l Power supply: differential mode±2kV, common mode±4kV l Copper port: differential mode±2kV, common mode±4kV l Relay: differential mode±2kV, common mode±4kV
Shock: IEC 60068-2-27 Free fall: IEC 60068-2-31 Vibration: IEC 60068-2-6 |
Authentication | CE, FCC, RoHS |
Warranty | 5 years |
Ordering Information
IES1100-24T-2LV
100M Copper Port
24
100M Fiber Port
0
Power Supply
24VDC/48VDC (18~72VDC) Support dual power supply redundancy and non-polarity
IES1100-24T-2HV
100M Copper Port
24
100M Fiber Port
0
Power Supply
110VAC/DC, 220VAC/DC 85~264VAC/DC, dual power supply redundancy
IES1100-22T2F-2LV
100M Copper Port
22
100M Fiber Port
2
Power Supply
24VDC/48VDC (18~72VDC) Support dual power supply redundancy and non-polarity
IES1100-22T2F-2HV
100M Copper Port
22
100M Fiber Port
2
Power Supply
110VAC/DC, 220VAC/DC 85~264VAC/DC, dual power supply redundancy
IES1100-20T4F-2LV
100M Copper Port
20
100M Fiber Port
4
Power Supply
24VDC/48VDC (18~72VDC) Support dual power supply redundancy and non-polarity
IES1100-20T4F-2HV
100M Copper Port
20
100M Fiber Port
4
Power Supply
110VAC/DC, 220VAC/DC 85~264VAC/DC, dual power supply redundancy
IES1100-24F-2LV
100M Copper Port
0
100M Fiber Port
24
Power Supply
24VDC/48VDC (18~72VDC) Support dual power supply redundancy and non-polarity
IES1100-24F-2HV
100M Copper Port
0
100M Fiber Port
24
Power Supply
110VAC/DC, 220VAC/DC 85~264VAC/DC, dual power supply redundancy
Documentation & Downloads
Recommended Products
ICS5428 Series
28-port Gigabit /10Gigabit Layer 3 Industrial Ethernet Switch
ICS6420 Series
20-Port Gigabit/10Gigabit Layer 3 Industrial Ethernet Switch
MES5400 Series
30-port Gigabit/10Gigabit Modular Layer 3 Industrial Ethernet Switch
ICS5400TSN-24GT16GS4XS
44-Port Gigabit /10Gigabit Layer 3 TSN Industrial Ethernet Switch
Make an appointment with an expert to receive a free assessment of your industrial network needs










