RCU100-L02 Series

ARM Architecture Industrial IoT Edge Computing Intelligent Gateway

Support 2 100M copper ports, 1 RS-232 serial port, 4 RS-485 serial ports, 6 DI ports and 6 DO ports (optional)

Support USB2.0, TF card, SIM card, 4G/5G antenna interface (optional) and WiFi/GNSS antenna interface (optional)

Support all kinds of mainstream industrial communication protocols

Support cellular 4/5G, WiFi networking, which can send data to the cloud

Support 9~36VDC power supply input and nonpolarity

Support -40~75℃ wide temperature operation

Introduction

RCU100-L02 series products are quad-core architecture industrial IoT edge computing intelligent gateways, which can collect Ethernet, serial port and other terminal device information, and connect the third-party Internet of Things/cloud platform, realizing localization and cloud remote collaborative management and control. Provide 4G/5G, WiFi networking, BDS, 100M copper port, RS-232/485, USB, DI, DO and other interface types, using DIN-Rail installation mode that can meet the needs of different application sites.

RCU100-L02 series products are intelligent gateways that solve the communication problem of industrial Internet of Things. It can deal with the inconsistency of communication protocols between different software systems, controllers and data acquisition devices, and realize information integration and application support of the Internet of Things. It adopts high-performance embedded hardware platform, embedded industrial data collection and processing system, and has a variety of communication protocol libraries, which can realize centralized collection, preprocessing, protocol conversion and multiplexing and forwarding of data from different software systems, controllers and field devices, and support 4G/5G, WiFi networking to send data to the cloud.

The hardware adopts fanless, low power consumption and wide temperature and voltage design, which has passed rigorous industrial standard tests, and suits the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, smart manufacturing, smart factories, smart water affairs, smart logistics, smart buildings, smart poles and other intelligent fields.

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE802.3u for 100Base-TX

System Information

Processor: ARM dual-core, T113i CPU 1.2GHz

System: Linux

Memory: 1GB DDR3

Storage: 256MB

Software Functions

Security function: IP Address Filtering, MAC Address Filtering, Port Forwarding

Diagnostic tools: Ping test, route tracking

Network management: network configuration, cellular network

System Management: Log management, time setting, communication monitoring, backup and restore, system recovery

Cellular Network

4/5G cellular network, network standard WCDMA, CDMA, EVDO, LTE FDD, LTE TDD, TD-SCDMA, 5G NR-FDD, 5G NR-TDD

Ethernet Port

100M copper port: 2 100M RJ45 copper ports, 10/100Base-TX, support 10M/100M self-adaption, full duplex/half duplex self-adaption

Serial Port

Standard: EIA RS-232C, RS-485

Quantity of serial ports: 1 RS-232, 4 RS-485

RS-232 signal: DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS

RS-485 signal: D+, D-, GND

Baud rate: 1200bps-115200bps

Data bit: 5bit, 6bit, 7bit, 8bit

Parity bit: None, Even, Odd

Stop bit: 1bit, 2bit

Flow control: RTS/CTS, DTR/DSR, XON/XOFF

Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC)

Load capacity: RS-485 terminal supports 32-node polling environment

Terminating resistance for RS-485: 120Ω, with A and R controlled by short-circuiting

Parameters of electromagnetic isolation device: 3KVDC/2KVrms

Transmission distance: RS-232, 15m; RS-485, 1200m

Interface form: 2*10 PIN 3.5mm pitch terminal blocks, among which 1 RS-232 occupies 2*2 PIN and 4 RS-485 occupy 2*8 PIN

IO(Optional)

DI port: 6 DI ports (dry contact and wet contact), using 1*16PIN 3.5mm pitch terminal block, DI port occupies 1*8 PIN; When the negative terminal is connected to COM1 or COM2, it is a wet node; when it is not connected to COM1 or COM2, it is a dry contact

DO port: 6 DO ports (transistor output, drain type), using 1*16PIN 3.5mm pitch terminal block, DO port occupies 1*8 PIN.

USB Interface

1 type-A USB 2.0 Female, support system debugging and configuration file management

TF Slot

1 self-propelled TF card slot, software upgrade and configuration file management

SIM Slot

1 self-propelled SIM card slot

RESET

1 RESET button can realize device reboot and one-key factory default restoration.

CONSOLE

Provide 1 program debugging port based on Type-C interface which can conduct device CLI command management after connecting to PC.

4/5G Antenna Interface

(Optional)

Cellular 4G/5G, 1 4G or 2 5G RP-SMA-K type (Female) interfaces

WiFi Antenna Interface

(Optional)

WiFi site, IEEE802.11 b/g/n, 1 RP-SMA-K (Male) interface

GNSS Antenna Interface

(Optional)

BDS, 1 RP-SMA-K (Male) interface

Indicator

Power indicator, running indicator, ALM indicator, serial port indicator, WLAN indicator, WWAN indicator

Power Supply

1 9~36VDC power supply input

3-pin 5.08mm pitch terminal block, support non-polarity and overcurrent protection

TPM

TPM 2.0/TCM 2.0 (Optional), enabling trusted system bootloading

Power Consumption

RCU100-L02-G0W0-P(9-36VDC), RCU100-L02-G0-GNSS-P(9-36VDC), RCU100-L02-G0W0-12IO-P(9-36VDC):

No-load at normal temperature: 1.70W@24VDC

Full-load at normal temperature: 2.57W@24VDC

Full-load at high temperature: 3.19W@24VDC

 

RCU100-L02-5GW0-P(9-36VDC), RCU100-L02-5GW0-12IO-P(9-36VDC):

No-load at normal temperature: 2.40W@24VDC

Full-load at normal temperature: 4.18W@24VDC

Full-load at high temperature: 4.98W@24VDC

Working Environment

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%~95% (no condensation)

Mechanical Structure

Housing: IP40 protection, metal

Installation: DIN-Rail (standard) or wall (optional) mounting

Dimension (W x H x D): 40.6mm×150mm×120mm

Weight:

RCU100-L02-5GW0-12IO-P(9-36VDC): 0.669kg

RCU100-L02-5GW0-P(9-36VDC): 0.669kg

RCU100-L02-G0W0-12IO-P(9-36VDC): 0.656kg

RCU100-L02-G0W0-P(9-36VDC): 0.656kg

RCU100-L02-G0-GNSS-P(9-36VDC): 0.656kg

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

l Air discharge: ±8kV

l Contact discharge: ±6kV

 

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3

l Power supply: ±2kV

l Signal: ±1kV

 

IEC 61000-4-5 (Surge), Level 3

l Power supply: common mode ±2kV, differential mode ±1kV

l Signal: common mode±2kV, differential mode±1kV

 

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-31

Vibration: IEC 60068-2-6

Authentication

CE, FCC, RoHS

Warranty

3 years


Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More