IES318 Series

8-port 100M Layer 2 Unmanaged Industrial Ethernet Switch

Support 4/6/7/8 100M Ethernet copper ports and 4/2/1 100M Ethernet ports (optional fiber/copper ports)

Support relay alarm output

Support DC 12/24/48VDC (9~60VDC) dual power input and power supply nonpolarity

Support AC 220VAC/DC (85~264VAC/DC) power supply input

Support -40~75℃ wide temperature operation

Introduction

IES318 series is an 8-port 100M layer 2 unmanaged industrial Ethernet switch. This series provides 8 products and supports 100M copper ports and 100M fiber ports. They adopt wall or DIN-Rail mounting to meet the requirements of different application scenes.

DC power supply input consists of two independent power supply circuits, which can ensure device’s normal operation when one fails. The design of DIP switch can realize port alarm and power alarm. When power supply or port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX and 100Base-X

Interface

Copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode Self-Adaption, MDI/ MDI-X Autotunning

Fiber port: 100Base-X, optional SC/ST/FC

Alarm port: 2-pin 7.62mm pitch terminal blocks, supports 1 relay alarm output, and the current load capacity is 1A@24VDC or 0.5A@120VAC

Indicator

Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator

Switching Property

Transmission mode: store and forward

MAC address: 2K

Buffer: 1Mbit

Backplane bandwidth: 1.6G

Switch time delay: <10μs

Power Supply

l DC power: 12/24/48VDC (9~60VDC), with dual power supplies, built-in overcurrent protection, supports nonpolarity

l AC power: 220 VAC/DC (85~264VAC/DC), with built-in overcurrent protection

Working Environment

Operating temperature: -40~75℃

Storage temperature:-40~85℃

Relative humidity: 5%~95% (no condensation)

Physical Characteristic

Housing: IP40 protection, high-strength corrugated metal

Installation: DIN-Rail or wall mounting

Dimension (W x H x D): 53mm×138mm×110mm

Weight: 670g (AC); 627g (DC)

AC Product

Industrial Standard

IEC 61000-4-2 (ESD), Level 3

l Air discharge: ±8kV

l Contact discharge: ±6kV

 

IEC 61000-4-4 (EFT),Level3

l Power supply: ±2kV

l Ethernet port: ±1kV

l Relay: ±2kV

 

IEC 61000-4-5 (Surge), Level 3

l Power supply: common mode ±2kV, differential mode ±1kV

l Ethernet port: common mode ±2kV, differential mode ±1kV

l Relay: common mode ±2kV, differential mode ±1kV

 

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

DC Product

Industrial Standard

IEC 61000-4-2 (ESD), Level 4

l Air discharge: ± 15kV

l Contact discharge: ±8kV

 

IEC 61000-4-4 (EFT),Level4

l Power supply: ±4kV

l Ethernet port: ±2kV

l Relay: ±4kV

 

IEC 61000-4-5 (Surge),Level 4

l Power supply: common mode±4kV, differential mode±2kV

l Ethernet port: common mode±4kV, differential mode±2kV

l Relay: common mode ±4kV, differential mode±2kV

 

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Authentication

CE, FCC, RoHS

Warranty

5 years


Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More