TNS5500D 20-Port Series

Wall Mounting
20-Port 100M/Gigabit Layer 2 EN50155 Industrial Ethernet Switch

Support 4 Gigabit M12 interfaces (with 2 groups of Bypass function), 16 100M PoE M12 interfaces

Adopt Ring patented technology, support single ring, coupling ring, chain, Dual-homing function

The maximum output power of single-port PoE is 30W, and the maximum output power of the whole device PoE is 90W

Support optional 2 24VDC (18~36VDC) or 110VDC (66~156VDC) power supply inputs

Support IP67 protection grade

Support -40~75℃ wide operating temperature range

Introduction

TNS5500D 20-Port series are layer 2 managed industrial Ethernet switches. The product conforms to the requirements of industrial standard EN50155 and EN50121 Ethernet interfaces use firm and reliable M12 connectors which can adapt to usage scenario with vibration and shock. PoE power supply conforms to IEEE802.3af/at protocol standard, and it can power device over Ethernet, thus decreasing the cable connection of powered devices. This product supports 24VDC or 110VDC power supply input and adopts wall mounting, which can meet the needs of different application sites.

The network management system supports a variety of network protocols and industry standards, such as static routing, NAT, Ring, STP/RSTP/MSTP, GMRP, ERPS, DHCP Server/Snooping/Relay, VLAN, QoS, IGMP, IGMP Snooping, LLDP, link aggregation, port mirroring, etc.; it has complete management functions, supporting port configuration, port statistics, port IP binding, access control, 802.1X authentication, network diagnosis, quick configuration, online upgrade, etc.; it can support access methods such as CLI, WEB, Telnet, SNMP, SSH, etc. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

When port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The hardware adopts fanless, low power consumption and wide temperature design, and the external heat sink provides extraordinary heat dissipation performance. This device has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in systems such as train network, signal, on-board PIS, CCTV.

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

IEEE 802.3af for PoE

IEEE 802.3at for PoE+

ITU-T G.8032 for ERPS

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.1AB for LLDP

IEEE 802.3ad for LACP

Management

SNMP v1/v2c/v3 Centralized Management of Equipment, QoS, DHCP Server, DHCP Snooping, DHCP Relay, Static MAC Address, LLDP, Storm Suppression, User Password, Login Method, File Management, Log Management, Port Statistics, PoE Management

Security

User privilege classification, ACL, SSH/HTTPS protocol authorization, link flapping protection, port loopback detection, access control, SNMP, RMON, IPDT, IPv6DT, Smart-Link, NAT, port alarm, temperature alarm, power alarm, network load alarm

Switch Function

802.1Q VLAN, MAC, static aggregation, LACP, ARP, storm suppression

Unicast / Multicast

IGMP-Snooping, GMRP

Redundancy Technology

Ring, MRP, STP/RSTP/MSTP, ERPS

Troubleshooting

Ping, Traceroute, Network Cable Diagnosis

Time Management

NTP, Time Zone Configuration

Interface

Gigabit M12: 10/100/1000Base-T(X), M12(Female), 8-Pin X-Coded, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotuning; it supports two groups of Bypass

100M PoE M12: 10/100Base-T(X), M12 (Female), 4-Pin D-Coded, automatic flow control, full/half duplex mode, MDI/MDI-X automatic detection; The single port supports up to 30W PoE power supply output. Pin 1 and 3 of PoE power supply are positive, while pin 2 and 4 are negative

Alarm interface: M12(Female), 4-Pin D-Coded, support 1 relay alarm output, with current load capacity of 1A@30VDC or 0.3A@125VAC

Console port: CLI command line management port (RS-232), M12(Female), 4-Pin D-Coded

Indicator

Power indicator, alarm indicator, running indicator, interface indicator, PoE indicator

Switch Property

Transmission mode: store and forward

MAC address: 16K

Cache: 12Mbit

Backplane bandwidth: 128Gbps

Switch time delay: <10μs

Power Supply

Power supply range: 2 24VDC (18~36VDC) or 110VDC (66~156VDC)

Connection method: M12(Male), 4-Pin A-Coded

Connection protection: anti-reverse connection

Power Consumption

TNS5500D-16P4GT-P24:

No-load at normal temperature 25℃: 10.56W@24VDC

Full-load at normal temperature 25℃: 14.88W@24VDC

Full-load at high temperature 75℃: 116.4W@24VDC (with PoE load)

TNS5500D-16P4GT-P110:

No-load at normal temperature 25℃: 9.905W@110VDC

Full-load at normal temperature 25℃: 13.20W@110VDC

Full-load at high temperature 75℃: 101.2W@110VDC (with PoE load)

Working Environment

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%~95% (no condensation)

Mechanical Structure

Housing: IP67 protection, metal

Installation: wall mounting

Dimension (W x H x D): 260mm×160mm×92.7mm

Weight:

TNS5500D-16P4GT-P24: 2.586kg

TNS5500D-16P4GT-P110: 2.621kg

Industrial Standard

IEC 61000-4-2 (ESD), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV

IEC 61000-4-4 (EFT), Level 3

Power supply: ±2kV

Ethernet port: ±1kV

Relay: ±1kV

IEC 61000-4-5 (Surge), Level 3

Power supply: common mode ±2kV, differential mode ±1kV

Ethernet port: common mode ±2kV, differential mode ±1kV

Relay: common mode ±2kV, differential mode ±1kV

Shock: IEC 61373

Free fall: IEC 60068-2-31

Vibration: IEC 61373

Authentication

CE, FCC, RoHS, EN50155, EN50121-3-2, IEC61373, EN45545

Warranty

5 years

Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More