TNS5800D 12-Port Series

Wall Mounting
12-port Layer 3 EN50155 Industrial Ethernet Switch

Support 4 Gigabit M12 interfaces (with 2 groups of Bypass function)

Support 8 100M M12 interfaces or Gigabit M12 interface, PoE function (optional)

Adopt Ring patented technology, support single ring, coupling ring, chain, Dual-homing function

Support optional 24VDC (18~36VDC) or 110VDC(66~156VDC) power supply input

Supports PoE power supply, with a maximum PoE output power of 30W per port and a total PoE output power of 90W for the entire device

Support IP67 protection grade

Support -40~75℃ wide operating temperature range

Introduction

TNS5800D 12-Port series are layer 3 industrial Ethernet switches. The product conforms to the requirements of industrial standard EN50155 and EN50121 Ethernet interfaces use firm and reliable M12 connectors which can adapt to usage scenario with vibration and shock. PoE power supply conforms to IEEE802.3af/at protocol standard, and it can power device over Ethernet, thus decreasing the cable connection of powered devices. This product supports 24VDC or 110VDC power supply input and adopts wall mounting, which can meet the needs of different application sites.

Network management system supports various network protocols and industrial standards, such as Static Routing, RIP, VRRP, NAT, STP/RSTP/MSTP, GMRP, EPRS, 802.1Q VLAN, QoS, DHCP Server, DHCP Client, IGMP Static Multicast, LLDP, Port Trunking, Port Mirroring, etc. It also possesses complete management functions, including Port Configuration, Port Statistics, Port IP Binding, Access Control, 802.1X Authentication, Network Diagnosis, Rapid Configuration, Online Upgrading and so on; and supports CLI, HTTP, HTTPS, Telnet, SSH and other access methods., Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

When a port has a link failure, the ALM indicator will light up for rapid on-site troubleshooting. The hardware adopts fanless, low power consumption and wide temperature design, and the external heat sink provides extraordinary heat dissipation performance. These devices have passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in systems such as train network, signal, on-board PIS, CCTV.

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

ITU-T G.8032 for ERPS

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.1AB for LLDP

IEEE 802.3ad for LACP

IEEE 802.3af for PoE

IEEE 802.3at for PoE+

Management

SNMP v1/v2c/v3 Centralized Management of Equipment, QoS, DHCP Server, DHCP Snooping, DHCP Relay, Static MAC Address, LLDP, Storm Suppression, User Password, Login Method, File Management, Log Management, Port Statistics, PoE Management (for PoE version)

Security

User privilege classification, ACL, SSH/HTTPS protocol authorization, link flapping protection, port loopback detection, access control, SNMP, RMON, IPDT, IPv6DT, Smart-Link, NAT, port alarm, temperature alarm, network load alarm

Switch Function

802.1Q VLAN, MAC, static aggregation, LACP, ARP, storm suppression

Unicast / Multicast

IGMP-Snooping, MLD-Snooping, GMRP, IGMP, MLD, PIM-SM, PIM-DM, IPv6-PIM-SM, IPv6-PIM-DM

Redundancy Technology

Ring, MRP, STP/RSTP/MSTP, ERPS

Troubleshooting

Ping, Traceroute, Network Cable Diagnosis

Routing Technique

RIP, RIPng, OSPF, OSPFv3, ISIS, VRRP, IPv6 VRRP, BGP

Time Management

NTP, Time Zone Configuration

Interface

Gigabit PoE M12:10/100/1000base-T (X), M12 (Female), 8-Pin X-Coded, automatic flow rate control, full/half duplex mode, MDI/MDI-X automatic detection; The maximum capacity of a single port is 30W PoE power supply output. Pin 1 and 2 of PoE power supply are positive, while Pin 3 and 4 are negative

Gigabit M12: 10/100/1000Base-T(X), M12(Female), 8-Pin X-Coded, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotuning;it supports two pairs of Bypass functions

100M PoE M12:10/100base-T(X), M12 (Female), 4-Pin D-Coded, automatic flow control, full/half duplex mode, MDI/MDI-X automatic detection; The single port supports up to 30W PoE power supply output. Pin 1 and 2 of PoE power supply are positive, while pin 3 and 4 are negative

100M M12: 10/100Base-T(X), M12(Female), 4-Pin D-Coded, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotuning

USB/CONSOLE port: USB and CONSOLE port can be integrated. Console port can be connected with PC for CLI command management of device. Adopt M12(Female), 8-pin x-coded. USB occupies 4Pin, and Console port occupies 4Pin.

Indicator

Power indicator, running indicator, alarm indicator, interface indicator, PoE indicator

Switch Property

Transmission mode: store and forward

MAC address: 16K

Buffer: 12Mbit

Backplane bandwidth: 128Gbps

Switch time delay: <10μs

Power Supply

Power supply range:

TNS5800D-8T4GT-P24: 24VDC (18~36VDC)

TNS5800D-8T4GT-P110: 110VDC (66~156VDC)

TNS5800D-8P4GT-P24: 24VDC (18~36VDC)

TNS5800D-8P4GT-P110: 110VDC (66~156VDC)

TNS5800D-8GP4GT-P24: 24VDC (18~36VDC)

TNS5800D-8GP4GT-P110: 110VDC (66~156VDC)

TNS5800D-12GT-P110: 110VDC (66~156VDC)

Connection method: M12(Male), 4-Pin A-Coded

Connection protection: anti-reverse connection

Power Consumption

Model

No-load

Full-load

TNS5800D-8T4GT-P24

25°C: 9.6W@24VDC

25°C: 11.76W@24VDC

75°C: 11.96W@24VDC

TNS5800D-8T4GT-P110

25°C: 11.01W@110VDC

25°C: 13.21W@110VDC

75°C: 13.29W@110VDC

TNS5800D-8P4GT-P24

25°C: 9.6W@24VDC

25°C: 11.76W@24VDC

75°C: 11.96W@24VDC

TNS5800D-8P4GT-P110

25°C: 12.18W@110VDC

25°C: 13.21W@110VDC

75°C: 13.29W@110VDC

TNS5800D-8GP4GT-P24

25°C: 9.44W@24VDC

25°C: 12.19W@24VDC

75°C: 13.05W@24VDC

TNS5800D-8GP4GT-P110

25°C: 9.87W@110VDC

25°C: 14.23W@110VDC

75°C: 14.74W@110VDC

TNS5800D-12GT-P110

25°C: 9.87W@110VDC

25°C: 14.23W@110VDC

75°C: 14.74W@110VDC

Working Environment

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%~95% (no condensation)

Mechanical Structure

Housing: IP67 protection, metal

Installation: wall mounting

Dimension (W x H x D): 178mm×104mm×70.5mm

Weight:

TNS5800D-8T4GT-P24: 1.250kg

TNS5800D-8T4GT-P110: 1.260kg

TNS5800D-8P4GT-P24: 1.252kg

TNS5800D-8P4GT-P110: 1.260kg

TNS5800D-8GP4GT-P24: 1.264kg

TNS5800D-8GP4GT-P110: 1.189kg

TNS5800D-12GT-P110: 1.189kg

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 4

Air discharge: ±15kV

Contact discharge: ±8kV

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 4

Power supply: ±4kV

Ethernet port: ±2kV

IEC 61000-4-5 (Surge), Level 4

Power supply: common mode ±4kV, differential mode ±2kV

Ethernet interface: common mode±4kV

Shock: IEC 61373

Free fall: IEC 60068-2-31

Vibration: IEC 61373

Authentication

CE, FCC, RoHS, EN45545-2, EN50155, IEC61373, EN62368

Warranty

5 years

Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More