TNS5800D 20-Port Series
Wall Mounting
20-Port 100M/Gigabit Layer 3 EN50155 Industrial Ethernet Switch
Support 4 Gigabit M12 interfaces (with 2 groups of Bypass function)
Support 16 100M M12 interfaces or Gigabit M12 interface, PoE function (optional)
Adopt Ring patented technology, support single ring, coupling ring, chain, Dual-homing function
Support PoE power supply, the maximum output power of single port PoE is 30W, and the maximum output power of whole device is 90W.
Support optional 2 24VDC (18~36VDC) or 110VDC (66~156VDC) power supply inputs
Support IP67 protection grade
Support -40~75℃ wide operating temperature range
Introduction
TNS5800D 20-Port series are layer 3 managed industrial Ethernet switches. The product conforms to the requirements of industrial standard EN50155 and EN50121 Ethernet interfaces use firm and reliable M12 connectors which can adapt to usage scenario with vibration and shock. PoE power supply conforms to IEEE802.3af/at protocol standard, and it can power device over Ethernet, thus decreasing the cable connection of powered devices. This product supports 24VDC or 110VDC power supply input and adopts wall mounting, which can meet the needs of different application sites.
Network management system supports various network protocols and industrial standards, such as Static Routing, RIP, VRRP, NAT, STP/RSTP/MSTP, GMRP, EPRS, 802.1Q VLAN, QoS, DHCP Server, DHCP Client, IGMP Static Multicast, LLDP, Port Trunking, Port Mirroring, etc. It also possesses complete management functions, including Port Configuration, Port Statistics, Port IP Binding, Access Control, 802.1X Authentication, Network Diagnosis, Rapid Configuration, Online Upgrading and so on; and supports CLI, HTTP, HTTPS, Telnet, SSH and other access methods, Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
When port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The hardware adopts fanless, low power consumption and wide temperature design, and the external heat sink provides extraordinary heat dissipation performance. This device has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in systems such as train network, signal, on-board PIS, CCTV.
Technical Specifications
Standard & Protocol | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.3af for PoE IEEE 802.3at for PoE+ ITU-T G.8032 for ERPS IEEE 802.1Q for VLAN IEEE 802.1p for CoS IEEE 802.1AB for LLDP IEEE 802.3ad for LACP |
Management | SNMP v1/v2c/v3 Centralized Management of Equipment, QoS, DHCP Server, DHCP Snooping, DHCP Relay, Static MAC Address, LLDP, Storm Suppression, User Password, Login Method, File Management, Log Management, Port Statistics, PoE Management |
Security | User privilege classification, ACL, SSH/HTTPS protocol authorization, link flapping protection, port loopback detection, access control, SNMP, RMON, IPDT, IPv6DT, Smart-Link, NAT, port alarm, temperature alarm, power alarm, network load alarm |
Switch Function | 802.1Q VLAN, MAC, static aggregation, LACP, ARP, storm suppression |
Unicast / Multicast | IGMP-Snooping, MLD-Snooping, GMRP, IGMP, MLD, PIM-SM, PIM-DM, IPv6-PIM-SM, IPv6-PIM-DM |
Redundancy Technology | Ring, MRP, STP/RSTP/MSTP, ERPS |
Routing Technique | RIP, RIPng, OSPF, OSPFv3, ISIS, VRRP, IPv6 VRRP, BGP |
Troubleshooting | Ping, Traceroute, Network Cable Diagnosis |
Time Management | NTP, Time Zone Configuration |
Interface | Gigabit PoE M12:10/100/1000base-T (X), M12 (Female), 8-Pin X-Coded, automatic flow rate control, full/half duplex mode, MDI/MDI-X automatic detection; The maximum capacity of a single port is 30W PoE power supply output. Pin 1 and 2 of PoE power supply are positive, while Pin 3 and 4 are negative Gigabit M12: 10/100/1000Base-T(X), M12(Female), 8-Pin X-Coded, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotuning; it supports two groups of Bypass 100M PoE M12: 10/100Base-T(X), M12 (Female), 4-Pin D-Coded, automatic flow control, full/half duplex mode, MDI/MDI-X automatic detection; The single port supports up to 30W PoE power supply output. Pin 1 and 3 of PoE power supply are positive, while pin 2 and 4 are negative 100M M12: 10/100Base-T(X), M12(Female), 4-Pin D-Code, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotuning Alarm interface: M12(Female), 4-Pin D-Coded, support 1 relay alarm output, with current load capacity of 1A@30VDC or 0.3A@125VAC Console port: CLI command line management port (RS-232), M12(Female), 4-Pin D-Coded |
Indicator | Power indicator, alarm indicator, running indicator, interface indicator, PoE indicator |
Switch Property | Transmission mode: store and forward MAC address: 16K Cache: 12Mbit Backplane bandwidth: 128Gbps Switch time delay: <10μs |
Power Supply | Power supply range: 2 110VDC (66~156VDC) or 24VDC (18~36VDC) Connection method: M12(Male), 4-Pin A-Coded Connection protection: anti-reverse connection |
Power Consumption | TNS5800D-16T4GT-P24: No-load at normal temperature 25℃: 7.17W@24VDC Full-load at normal temperature 25℃: 10.82W@24VDC Full-load at high temperature 75℃: 11.54W@24VDC TNS5800D-16T4GT-P110: No-load at normal temperature 25℃: 8.86W@110VDC Full-load at normal temperature 25℃: 12.17W@110VDC Full-load at high temperature 75℃: 13.28W@110VDC TNS5800D-16P4GT-P24: No-load at normal temperature 25℃: 10.56W@24VDC Full-load at normal temperature 25℃: 14.88W@24VDC Full-load at high temperature 75℃: 116.4W@24VDC (with PoE load) TNS5800D-16P4GT-P110: No-load at normal temperature 25℃: 9.905W@110VDC Full-load at normal temperature 25℃: 13.20W@110VDC Full-load at high temperature 75℃: 101.2W@110VDC (with PoE load) TNS5800D-16GP4GT-P24: No-load at normal temperature 25℃: 10.08W@24VDC Full-load at normal temperature 25℃: 18.48W@24VDC Full-load at high temperature 75℃: 112.5W@24VDC (with PoE load) TNS5800D-16GP4GT-P110: No-load at normal temperature 25℃: 9.906W@110VDC Full-load at normal temperature 25℃: 18.70W@110VDC Full-load at high temperature 75℃: 117.7W@110VDC (with PoE load) |
Working Environment | Operating temperature: -40~75℃ Storage temperature: -40~85℃ Relative humidity: 5%~95% (no condensation) |
Mechanical Structure | Housing: IP67 protection, metal Installation: wall mounting Dimension (W x H x D): 260mm×160mm×92.7mm Weight: TNS5800D-16T4GT-P24: 2.486kg TNS5800D-16T4GT-P110: 2.490kg TNS5800D-16P4GT-P24: 2.586kg TNS5800D-16P4GT-P110: 2.621kg TNS5800D-16GP4GT-P24: 2.579kg TNS5800D-16GP4GT-P110: 2.563kg |
Industrial Standard | IEC 61000-4-2 (ESD), Level 4 Air discharge: ±15kV Contact discharge: ±8kV IEC 61000-4-4 (EFT), Level 4 Power supply: ±4kV Ethernet port: ±2kV Relay: ±4kV IEC 61000-4-5 (Surge), Level 4 Power supply: common mode ±4kV, differential mode ±2kV Ethernet port: common mode ±4kV, differential mode ±2kV Relay: common mode ±4kV, differential mode ±2kV Shock: IEC 61373 Free fall: IEC 60068-2-31 Vibration: IEC 61373 |
Authentication | CE, FCC, RoHS, EN50155, EN50121-3-2, IEC61373, EN45545 |
Warranty | 5 years |
Ordering Information
TNS5800D-16T4GT-P24
100M M12
16
100M PoE M12
—
Gigabit PoE M12
—
Gigabit M12 With 2 Sets of Bypass
4
Power Supply
2 24VDC (18~36VDC)
TNS5800D-16P4GT-P24
100M M12
—
100M PoE M12
16
Gigabit PoE M12
—
Gigabit M12 With 2 Sets of Bypass
4
Power Supply
2 24VDC (18~36VDC)
TNS5800D-16GP4GT-P24
100M M12
—
100M PoE M12
—
Gigabit PoE M12
16
Gigabit M12 With 2 Sets of Bypass
4
Power Supply
2 24VDC (18~36VDC)
TNS5800D-16T4GT-P110
100M M12
16
100M PoE M12
—
Gigabit PoE M12
—
Gigabit M12 With 2 Sets of Bypass
4
Power Supply
2 110VDC (66~156VDC)
TNS5800D-16P4GT-P110
100M M12
—
100M PoE M12
16
Gigabit PoE M12
—
Gigabit M12 With 2 Sets of Bypass
4
Power Supply
2 110VDC (66~156VDC)
TNS5800D-16GP4GT-P110
100M M12
—
100M PoE M12
—
Gigabit PoE M12
16
Gigabit M12 With 2 Sets of Bypass
4
Power Supply
2 110VDC (66~156VDC)
M12(Male), 8-Pin X-Coded
PN
2015010025
Type
Gigabit connector
Cable Clamping Range
24-26AWG
Cable Outlet Diameter
6-8mm
Remarks
Optional
M12(Male), 4-Pin D-Coded
PN
2015010024
Type
100M connector
Cable Clamping Range
18-26AWG
Cable Outlet Diameter
6-8mm
Remarks
Optional
M12(Female), 4-Pin A-Coded
PN
2015020052
Type
Power connector
Cable Clamping Range
18-20AWG
Cable Outlet Diameter
6-8mm
Remarks
Optional
Documentation & Downloads
Recommended Products
TNS5500D Series (8-Port)
Wall/Rail Mounting
8-Port 100M Layer 2 Managed Industrial Ethernet Switch for Rail Transit
TNS5500D 20-Port Series
Wall Mounting
20-Port 100M/Gigabit Layer 2 EN50155 Industrial Ethernet Switch
TNS5500D 12-Port Series
Wall Mounting
12-Port Layer 2 EN50155 Industrial Ethernet Switch
Make an appointment with an expert to receive a free assessment of your industrial network needs










