IEM6400TSN-8GT4XS

Managed Industrial Ethernet Switch Module

Support 8 10/100/1000Base-T(X) Ethernet copper ports and 4 10Gigabit SFP+ slots

Support Precision Time Protocol (PTP), provide sub-microsecond synchronization accuracy to meet requirements for high-precision time synchronization

Support TSN (time sensitive networking) protocol standards such as IEEE802.1AS, IEEE802.1Qbv, IEEE802.1Qbu and IEEE802.1CB, which can provide deterministic transmission with low delay and high reliability for data.

Support MRP ring network, reconfiguration time < 200ms

Support 3.3VDC±5% voltage input

Support -40~75℃ wide operating temperature range

Introduction

IEM6400TSN-8GT4XS is a multi-service access type, embedded industrial Ethernet switch network management module that integrates TSN (time sensitive network) features, which has the characteristics of high integration, small size, rich functions, simple and convenient operation. This product supports 8 Gigabit copper ports and 4 Gigabit SFP+ slots; Using embedded installation mode, users can customize the PCB baseboard specifications and choose any Ethernet interface type through the module pin to meet the needs of different application sites.

TSN (Time Sensitive Networking) is a set of protocol standards developed by IEEE802.1 TSN task group. This standard defines the time sensitive mechanism of Ethernet data transmission, and ensures the transmission performance of business traffic in Ethernet by allowing some traffic packets to be forwarded first, clearing routes by using gating scheduling mechanism and bandwidth reservation. It adds certainty and reliability to the standard Ethernet to ensure that the Ethernet can provide stable and consistent service levels for the transmission of critical data. Currently, the supported basic TSN protocols include: IEEE 802.1AS, IEEE 802.1Qbv, IEEE 802.1Qbu, IEEE 802.1CB, etc.

Network management system supports a variety of network protocols and industry standards, such as ARP, IPv4, Ring, MRP, VLAN, STP/RSTP/MSTP, TSN, PTP, ERPS, LLDP, IGMP Snooping, QoS, port trunking, port mirroring, QBV, QBU, STEAM, CB etc. It has perfect management functions, supporting port configuration, port statistics, ACL, 802.1X authentication, network diagnosis, rapid configuration, online upgrade, etc. CLI, WEB, Telnet, SNMP, SSH and other access methods can be supported. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

The hardware adopts fanless, low power consumption and wide temperature and voltage design, which has passed rigorous industrial standard tests, and suits the industrial scene environment with harsh requirements for EMC. It can be widely used in smart substation, smart grid, energy storage, photovoltaic, wind electricity, non-electric industry SCADA system and other industrial fields.

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3z for 1000Base-X

IEEE 802.3ab for 1000Base-T

IEEE 802.3ae for 10GBase-X

IEEE 802.1AS for TSN

IEEE 802.1Qbv for TSN

IEEE 802.1Qbu for TSN

IEEE 802.1CB for TSN

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE802.1p for CoS

IEEE 802.1X for 802.1X Authentication

IEEE 802.1AB for LLDP

ITU-T G.8032 for ERPS

TSN

PTP, QBU, QBV, Stream, CB

Management

SNMP v1/v2c/v3 centralized managed equipment, Port Mirroring, Link Flapping Protection, RMON, LLDP, DHCP Server, DHCP Snooping, port statistics, file management, online upgrade, log information, Syslog report

Security

User authority classification, port and power alarm, MAC security, AAA, 802.1X authentication, RADIUS, TACACS+, MAC-Based authentication, port speed limit, port isolation, port alarm, temperature alarm, power alarm, network load alarm

Switch Function

802.1Q VLAN, link aggregation, flow control, ARP, storm control

Unicast / Multicast

Multicast filtering, IGMP Snooping

Redundancy Technology

STP/RSTP/MSTP, ERPS, Ring, MRP

Troubleshooting

Ping, Traceroute, Network Cable Diagnosis, SFP Digital Diagnosis

Time Management

NTP, PTP

Connector

2 2x40 PIN connectors; 1 2x20 PIN connector

Interface

Gigabit copper port: 8 10/100/1000Base-T(X) copper ports, self-adaption or forced mode, Automatic Flow Control, Full/Half Duplex self-adaption, MDI/ MDI-X Autotunning

10Gigabit SFP+ slot: 4 10G Base-X self-adaption, 1G/2.5G forced mode, SFP+ slot

Console port: CLI command management port, TTL level serial data

Indicator

Running Indicator, Alarm Indicator, Power Supply Indicator, Interface Indicator

Switch Property

Transmission mode: store and forward

MAC address: 32K

Cache: 3Mbit

Backplane bandwidth: 50Gbps

Switch time delay: <10μs

Power Supply

3.3VDC±5%

Working Environment

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%~95% (no condensation)

Power Consumption

No-load: 5.6W@12VDC (including DEMO board)

Full load: 11.5W@12VDC (including DEMO board)

Mechanical Structure

Installation: embedded mounting

Dimension (W x H x D): 90mm×18.1mm×72mm

Weight: 206g

Warranty

5 years


Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More