MC201-F Series

Wall Mounting
1 CAN to Fiber MODEM

Support 1 CAN port to 1 fiber port

CAN port supports two options for choosing baud rate, automatic detection and user definition. The range of baud rate is 2.5kbps-1000kbps

Data receiving/storing/forwarding could be achieved between 2 CAN networks with different rates when used in pairs

It can extend CAN bus transmission distance, the transmission distance of fiber port can reach up to 15km

Support 5VDC or 12VDC power input

Support -40~75℃ wide operating temperature range

Introduction

MC201-F series is a CAN bus signal to optical signal converter. It’s specially designed for solving problems like short transmission distance and electromagnetic interference during CAN bus transmission. It supports 1 CAN port to 1 fiber port transparent transmission, supports 5VDC or 12VDC power input, and adopts wall mounting which can meet the requirements of different scenes.

DIP switch could implement baud rate setting of CAN port. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, building automation, healthcare automation system, measuring instrument and environment monitoring system, etc.

Technical Specifications

Fiber Port

Interface form:SC/ST/FC

Transmission distance:

multimode:2km

single mode:15km

Optical cable:

multimode:50/125μm or 62.5/125μm

single mode:8.3/125μm、8.7/125μm、9/125μm or 10/125μm

Transmission wavelength:

multimode:1310nm

single mode:1310nm or 1550nm

CAN Interface

Standard: CAN2.0A, CAN2.0B

CAN signal: CANH, CANL, GND

Duplex mode: 2-wire Half Duplex Mode

Baud rate: 2.5kbps-1000kbps

Load capacity: support concurrent transmitting of 110 nodes

Transmission distance: 40m~10km

Interface form: adopt 5-pin 5.08mm pitch terminal blocks

Terminating resistor: optional external 120Ω terminating resistor

Interface protection: 2kVAC isolation protection

LED Indicator

Power supply indicator, fiber port/data indicator, CAN port indicator

Power Requirement

5VDC,DC round head, standard power terminal

12VDC, using 2-pin 5.08mm pitch power terminal

Power Consumption

No-load: 1.31W@5VDC, 1.31W@12VDC

Full-load: 1.39W@5VDC, 1.39W@12VDC

Environmental Limit

Operating temperature: -40~75℃

Storage temperature:-40~85℃

Relative humidity: 5%~95% (no condensation)

Physical Characteristic

Housing: IP40 protection, metal

Installation: wall mounting

Dimension (W x H x D): 69mm×22mm×100mm

Weight: 237g

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Certification

CE, FCC, RoHS

Warranty

3 years

Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More