MES5100-24T2S-2HV

19-inch 1U Rack Mounting
26-Port 100M Layer 2 Managed Industrial Ethernet Switch

Support 24 100M copper ports and 2 100M SFP slots

Adopt Ring patented technology, support single ring, coupling ring, chain, Dual-homing ring network function, automatic recovery time of network failure < 50ms

Support MRP network redundancy, improve network reliability, reconfiguration time ≤200ms

Support Modbus TCP protocol, and the client can read the switch information, which is convenient for integrated monitoring and management

2*110VDC, 220VAC/DC dual power supply input

Support -40~75℃ wide operating temperature range

Support IP40 protection grade

Introduction

MES5100-24T2S-2HV series product is a 26-port 100M layer 2 managed industrial Ethernet switch. The product provides 100M copper port, and 100M SFP slot. Copper ports can negotiate the port rate and duplex mode with the device at the opposite end through self-negotiation. Support 110VDC or 220VAC/DC power supply scheme, and adopt rack installation mode, which can meet the requirements of different application sites.

Network management system supports a variety of network protocols and industry standards, such as IPv4, VLAN, STP/RSTP/MSTP, ERPS, DHCP, LLDP, IGMP Snooping, QoS, Modbus TCP monitoring, port trunking, port mirroring, etc. It has perfect management functions, supporting port configuration, port statistics, ACL, 802.1X authentication, network diagnosis, rapid configuration, online upgrade, etc. CLI, WEB, Telnet, SNMP, SSH, and other access methods can be supported. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The hardware adopts fanless, low power consumption and wide temperature design, which has passed rigorous industrial standard tests, and suits the industrial scene environment with harsh requirements for EMC. It can be used in smart grid, energy storage, photovoltaic, wind electricity, and other industrial fields.

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX and 100Base-FX

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEC 62439-2 for MRP

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.1X for 802.1X Authentication

IEEE 802.1AB for LLDP

Management

SNMP v1/v2c/v3, RMON, LLDP, QoS, DHCP Server, DHCP Snooping, port settings, dynamic/static MAC addresses, storm suppression, log management, port statistics, link flapping protection, Modbus TCP monitoring

Security

User Privilege Classification, SSH Configuration, HTTPS Configuration, Access Control, SNMP, RMON, Port Limit Control, ACL, IP Source Guard, RADIUS Server Authentication, TACACS + Server Authentication, Port Alarm, Temperature Alarm, Power Supply Alarm, MRP Alarm, Network Load Alarm

Switch Function

802.1Q VLAN, link aggregation, static aggregation, flow control, LACP

Unicast / Multicast

Multicast filtering, IGMP Snooping, GMRP

Redundancy Technology

Ring, STP/RSTP/MSTP, ERPS

Troubleshooting

Log record, port mirroring, Ping, Traceroute, network cable diagnosis, SFP Digital Diagnosis

Time Management

NTP, Time Zone Configuration

Interface

100M copper port: 10/100Base-T(X) self-adaption, RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/ MDI-X Autotuning

100M SFP slot: 100Base-X SFP slot

CONSOLE port: CLI command line management port (RS-232), RJ45

Fault/Alarm port: support 1 relay alarm output and 1 fault output, adopt a 3-pin 5.08mm pitch terminal block

Indicator

Power indicator, operation indicator, alarm indicator, abnormal interruption indicator, status indicator, Link/Act indicator

Switch Property

Transmission mode: store and forward

Backplane bandwidth: 12.8Gbps

Packet buffer size: 4.1Mbit

MAC address: 8K

Switch delay: <10μs

Power Supply

Access terminal: 5-pin 5.08mm pitch terminal block

Power input: 110VDC, 220VAC/DC, dual power supply redundancy, DC power input anti-reverse connection

Power Consumption

No-load at normal temperature: 4.21W@220VAC

Full-load at normal temperature: 7.01W@220VAC

Full-load at high temperature: 7.43W@220VAC

Working Environment

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%~95% (no condensation)

Mechanical Structure

Housing: IP40 protection, metal

Installation: 19-inch 1U rack mounting

Dimension (W x H x D): 441.6mm×44mm×300mm (lugs are not included)

Industrial Standard

IEC 61000-4-2 (ESD, electronic static discharge), Level 4

Contact discharge: ±8kV

Air discharge: ±15kV

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 4

Power supply: ±4kV

Copper port: ±2kV

Relay: ±4kV

IEC 61000-4-5 (Surge), Level 4

Power supply: differential mode±2kV, common mode±4kV

Copper port: differential mode±2kV, common mode±4kV

Relay: differential mode±2kV, common mode±4kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-31

Vibration: IEC 60068-2-6

Authentication

CE, FCC, RoHS

Warranty

5 years

Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More