MES5300-28GS Series

19-inch 1U Rack Mounting
28-Port Full Gigabit Layer 2 Managed Industrial Ethernet Switch

Support 28 Gigabit SFP slots

Support MRP ring network, reconfiguration time < 200ms

Support multiple network protocols and industrial standards, such as ARP, STP/RSTP/MSTP, ERPS, VLAN, LACP, IGMP Snooping, LLDP, SNMP, etc., support Modbus TCP monitoring instruction of electricity SCADA system

Support IEC61850-MMS, ensuring the efficient, reliable and standardized communication between substation devices

DC product supports 2 24/48VDC (18-72VDC), dual power supply redundancy, support anti-reverse connection

AC product supports 2 110/ 220VAC/DC (85-264VAC/77-300VDC), dual power supply redundancy

Support -40~85℃ wide temperature operation, support level 4 electromagnetic compatibility protection, and conform to IEC 61850-3 and IEEE 1613 (substation) standards

Introduction

MES5300-28GS series products are 28-port full Gigabit layer 2 managed industrial Ethernet switches. This series provides Gigabit SFP slot, and adopts standard rack installation method, which is specially designed for extremely severe electromagnetic interference environment to meet the anti-interference requirements of power monitoring industry.

Network management system supports a variety of network protocols and industry standards, such as ARP, Ipv4, Ring, MRP, VLAN, STP/RSTP/MSTP, PTP, ERPS, LLDP, IGMP Snooping, Modbus TCP, QoS, port trunking, port mirroring, etc. It has perfect management functions, supporting port configuration, port statistics, ACL, 802.1X authentication, network diagnosis, rapid configuration, online upgrade, etc. CLI, WEB, Telnet, SNMP, SSH and other access methods can be supported. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The hardware adopts fanless, low power consumption and wide temperature and voltage design, which has passed rigorous industrial standard tests, and suits the industrial scene environment with harsh requirements for EMC. It can be widely used in smart substation, smart grid, energy storage, photovoltaic, wind electricity, non-electric industry SCADA system and other industrial fields.

Technical Specifications

Standard & Protocol

IEEE 802.3u for 100Base-FX

IEEE 802.3z for 1000Base-X

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE802.1p for CoS

IEEE 802.1X for 802.1X Authentication

IEEE 802.1AB for LLDP

ITU-T G.8032 for ERPS

Management

SNMP v1/v2 c/v3, RMON, LLDP, DHCP Server, DHCP Snooping, Modbus TCP monitoring, IEC61850 MMS, QoS, Port settings, dynamic/static MAC address, MAC/IPv4, log reporting

Security

User permission classification, MAC security, AAA, 802.1X authentication, Radius, TACACS+, MAC Based authentication, storm control, SSH/HTTPS protocol authorization, link oscillation protection, port loop detection, access control, SNMP, RMON, Smart-Link, Port alarm, temperature alarm, power alarm, network load alarm

Switch Function

802.1Q VLAN, link aggregation, flow control

Unicast / Multicast

Multicast filtering, IGMP Snooping

Redundancy Technology

STP/RSTP/MSTP, ERPS, Ring, MRP

Troubleshooting

Log record, port mirroring, Ping, Traceroute, network cable diagnosis, SFP DDM

Time Management

NTP, PTP

Interface

Gigabit SFP: 100/1000Base-X SFP slot, 100M/Gigabit self-adaption (G1-G24), Gigabit (G25-G28)

Console port: CLI command line management port (RS-232), RJ45

Alarm port: support 1 relay alarm output, adopt 3-pin 5.08mm pitch terminal blocks, current carrying capacity is 2A@250VAC or 2A@220VDC

Indicator

Running Indicator, Alarm Indicator, Power Supply Indicator, Interface Indicator

Switch Property

Transmission mode: store and forward

MAC address: 32K

Cache: 32Mbit

Backplane bandwidth: 90Gbps

Switch time delay: <10μs

Power Supply

Adopt 5-pin 5.08mm pitch terminal blocks

DC Product

2 24/48VDC (18-72VDC), dual power supply redundancy, support anti-reverse connection

AC product

2 110/220VAC/DC (85-264VAC/77-300VDC), dual power supply redundancy

Working Environment

Operating temperature: -40~85℃

Storage temperature: -40~85℃

Relative humidity: 5%~95% (no condensation)

Power Consumption

Model

No-load

Full-load

MES5300-28GS-2LV

18.5W@48VDC

36.2W@48VDC

MES5300-28GS-2HV

17.6W@220VAC

40.7W@220VAC

Mechanical Structure

Housing: IP40 protection, metal

Installation: 19-inch 1U rack mounting

Dimension (W x H x D): 491.6mm×44.45mm×290mm

Weight:

MES5300-28GS-2LV: 5.125kg

MES5300-28GS-2HV: 5.387kg

Industrial Standard

IEC 61000-4-2 (ESD, electronic static discharge), Level 4

Air discharge: ± 15kV

Contact discharge: ±8kV

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 4

Power supply: ±4kV

Relay: ±4kV

IEC 61000-4-5 (Surge), Level 4

Power supply: common mode ±4kV, differential mode ±2kV

Relay: common mode ±4kV, differential mode ±2kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Authentication

CE, FCC, RoHS, IEC 61850-3 (in authentication), IEEE 1613 (in authentication)

Warranty

5 years

Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More