IES5100 Series

24-Port Layer 2 Managed Industrial Ethernet Switch

Support 24 100M Ethernet ports (optional fiber/copper ports)

Adopt Ring patent technology, support single ring, coupling ring, chain ring, Dual-homing ring network function, automatic recovery time of network failure < 50ms

Support Modbus TCP protocol, and the client can read the switch information, which is convenient for integrated monitoring and management

Optional DC (18~72VDC) or AC (85~264VAC/DC) power supply, support dual power supply redundancy

Support -40~75℃ wide operating temperature range

Support IP40 protection grade

Introduction

IES5100 series are 24-port layer 2 managed industrial Ethernet switches. This series of products provide 100M copper port and 100M fiber port. A variety of different fiber/copper port combination schemes can be selected. Support 18~72VDC or 85~264VAC/DC power supply scheme(optional), and adopt rack installation mode, which can meet the requirements of different application sites.

Network management system supports various network protocols and industrial standards, such as STP/RSTP, 802.1Q VLAN, QoS Function, IGMP Snooping Function, Link Aggregation, Port Mirroring, LLDP, 802.1X, Modbus TCP; It also possesses complete management functions, including log information, DHCP Server, Port Configuration, Port Statistics, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SSH, SNMP and other access methods. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

RESET button can reboot the device and restore factory defaults. The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The hardware adopts fanless, low power consumption and wide temperature design, which has passed rigorous industrial standard tests, and suits the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, new energy storage, new energy, smart mining, smart motorway, intelligent manufacturing and other industrial fields.

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX and 100Base-X

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.1X for 802.1X Authentication

IEEE 802.1AB for LLDP

Management

SNMP v1/v2c/v3, Telnet/SSH configuration, Port Setting, Port Rate Limit, Port Mirroring, Port Statistics, Static MAC, LLDP, DHCP Server, QoS, Modbus TCP, Configuration File Management, Software Upgrade, log Information, Syslog Server

Security

User configuration, port loop detection, 802.1X authentication/Radius server, port/power alarm, utilization alarm and mail alarm.

Switch Function

802.1Q VLAN, link aggregation, flow control, storm control

Unicast / Multicast

Multicast filtering, IGMP Snooping, dynamic multicast, MAC information

Redundancy Technology

Ring, STP/RSTP

Troubleshooting

Ping

Time Management

SNTP Client, Time Zone Configuration

Interface

100M copper port: 10/100Base-T(X) self-adaption, RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/ MDI-X Autotunning

100M fiber port: 100Base-FX, SC connector

CONSOLE port: CLI command line management port(RS-232), RJ45

Relay: support 2 relay alarm outputs, and adopt 2 5-pin 5.08mm pitch terminal blocks, relay occupies the right 2 pins, the current carrying capacity is 1A@30VDC or 0.3A@125VAC

Indicator

Power indicator, running indicator, alarm indicator, interface indicator

Switch Property

Transmission mode: store and forward

MAC address: 16K

Packet buffer size: 4Mbit

Backplane bandwidth: 12.8Gbps

Switch delay: <10μs

Power Supply

IES5100-24T-2LV, IES5100-22T2F-2LV, IES5100-20T4F-2LV, IES5100-24F-2LV

l Input voltage: 24VDC/48VDC (18~72VDC)

l Power supply quantity: dual power supply redundancy

l Connection method: 2 5-pin 5.08mm pitch terminal blocks (includes 3-pin power supply on the left side)

l Connection protection: non-polarity

 

IES5100-24T-2HV, IES5100-22T2F-2HV, IES5100-20T4F-2HV, IES5100-24F-2HV

l Input voltage: 110VAC/DC, 220VAC/DC (85~264VAC/DC)

l Power supply quantity: dual power supply redundancy

l Connection method: 2 5-pin 5.08mm pitch terminal blocks (includes 3-pin power supply on the left side)

Working Environment

Operating temperature: -40~75℃

Storage temperature:-40~85℃

Relative humidity: 5%~95% (no condensation)

Mechanical Structure

Housing: IP40 protection, metal

Installation: 19-inch 1U rack mounting

Dimension (W x H x D): 440mm×44mm×207mm (lugs are not included)

 

Weight:

l IES5100-24T-2LV is 2.31kg

l IES5100-24T-2HV is 2.62kg

l IES5100-24F-2LV is 2.42kg

l IES5100-24F-2HV is 2.659kg

Industrial Standard

IEC 61000-4-2 (ESD, electronic static discharge), Level 4

l Contact discharge: ±8kV

l Air discharge: ± 15kV

 

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 4

l Power supply: ±4kV

l Copper port: ±2kV

l Relay: ±4kV

 

IEC 61000-4-5 (Surge), Level 4

l Power supply: differential mode±2kV, common mode±4kV

l Copper port: differential mode±2kV, common mode±4kV

l Relay: differential mode±2kV, common mode±4kV

 

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-31

Vibration: IEC 60068-2-6

Authentication

CE, FCC, RoHS

Warranty

5 years


Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More