IES5200 Series
28-port 100M/Gigabit Layer 2 Managed Industrial Ethernet Switch
Support 8/16/20/22/24 100M copper ports, 2/4/8/16 100M fiber ports and 4 Gigabit COMBO ports, in which Gigabit RJ45 or Gigabit SFP slots can be selected for COMBO ports
Adopt Ring patented technology, support single ring, coupling ring, chain, Dual-homing ring network function, automatic recovery time of network failure < 50ms
Support MRP network redundancy, improve network reliability, reconfiguration time ≤200ms
Support Modbus TCP protocol, and the client can read the switch information, which is convenient for integrated monitoring and management
2 24/48VDC (18-72VDC) or 2 110/220VAC (85~264VAC/DC) redundant power inputs
Support -40~75℃ wide operating temperature range
Support IP40 protection grade
Introduction
IES5200 series products are 28-port 100M/Gigabit layer 2 managed industrial Ethernet switches. This series has 10 products to choose from, providing 100M copper port, 100M fiber port, and Gigabit COMBO port. Copper ports can negotiate the port rate and duplex mode with the device at the opposite end through self-negotiation. Support 18~72VDC or 85~264VAC/DC power supply scheme, and adopt rack installation mode, which can meet the requirements of different application sites.
Network management system supports a variety of network protocols and industry standards, such as IPv4, VLAN, STP/RSTP/MSTP, ERPS, DHCP, LLDP, IGMP Snooping, QoS, Modbus TCP monitoring, port trunking, port mirroring, etc. It has perfect management functions, supporting port configuration, port statistics, ACL, 802.1X authentication, network diagnosis, rapid configuration, online upgrade, etc. CLI, WEB, Telnet, SNMP, SSH, and other access methods can be supported. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
RESET button can reboot the device and restore factory defaults. The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The hardware adopts fanless, low power consumption and wide temperature design, which has passed rigorous industrial standard tests, and suits the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, new energy storage, new energy, smart mining, smart motorway, intelligent manufacturing and other industrial fields.
Technical Specifications
Standard & Protocol | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEC 62439-2 for MRP IEEE 802.1Q for VLAN IEEE 802.1p for CoS IEEE 802.1X for 802.1X Authentication IEEE 802.1AB for LLDP |
Management | SNMP v1/v2c/v3, RMON, LLDP, PoE, QoS, DHCP Server, DHCP Snooping, port settings, dynamic/static MAC addresses, MAC/IPv4, storm suppression, user passwords, file management, log management, port statistics, link flapping protection, Modbus TCP monitoring |
Security | User Privilege Classification, SSH Configuration, HTTPS Configuration, Access Control, SNMP, RMON, Port Limit Control, Port Security, NAS, ACL, Ethernet Services, RADIUS Server Authentication, TACACS + Server Authentication, Port Alarm, Temperature Alarm, Power Supply Alarm, MRP Alarm, Network Load Alarm |
Switch Function | 802.1Q VLAN, link aggregation, static aggregation, flow control, LACP |
Unicast / Multicast | Multicast filtering, IGMP Snooping |
Redundancy Technology | Ring, STP/RSTP/MSTP, ERPS |
Troubleshooting | Log record, port mirroring, Ping, Traceroute, network cable diagnosis, SFP DDM |
Time Management | NTP, Time Zone Configuration |
Interface | 100M copper port: 10/100Base-T(X) self-adaption, RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/ MDI-X Autotunning 100M fiber port: 100Base-X, optional SC/ST/FC Gigabit Combo port: 10/100/1000Base-T(X) self-adaptive RJ45 or 1000Base-X SFP slot, support forced 100M CONSOLE port: CLI command line management port(RS-232), RJ45 Relay: support 2 relay alarm outputs, adopt 2 5-pin 5.08mm pitch terminal blocks, the relay occupies the right 2 pins, the current carrying capacity is 1A@30VDC or 0.3A@125VAC |
Indicator | Power indicator, running indicator, alarm indicator, interface indicator |
Switch Property | Transmission mode: store and forward MAC address: 8K Cache: 4.1Mbit Backplane bandwidth: 12.8Gbps Switch delay: <10μs |
Power Supply | Adopt 2 5-pin 5.08mm pitch terminal blocks (power supply occupies the left 3 pins) l DC Product 2 24/48VDC (18~72VDC), redundant power input, support non-polarity l AC product 2 110/220VAC (85~264VAC/DC) redundant power inputs |
Working Environment | Operating temperature: -40~75℃ Storage temperature: -40~85℃ Relative humidity: 5%~95% (no condensation) |
Industrial Standard | IEC 61000-4-2 (ESD, electronic static discharge), Level 4 l Contact discharge: ±8kV l Air discharge: ± 15kV
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 4 l Power supply: ±4kV l Copper port: ±2kV l Relay: ±4kV
IEC 61000-4-5 (Surge), Level 4 l Power supply: differential mode±2kV, common mode±4kV l Copper port: differential mode±2kV, common mode±4kV l Relay: differential mode±2kV, common mode±4kV
Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Authentication | CE, FCC, RoHS |
Warranty | 5 years |
Ordering Information
IES5200-8T16F4GC-2LV
100M Copper Port
8
100M Fiber Port
16
Gigabit COMBO Port
4
Power Supply
2*24/48VDC (18~72VDC) redundant power inputs
IES5200-16T8F4GC-2LV
100M Copper Port
16
100M Fiber Port
8
Gigabit COMBO Port
4
Power Supply
2*24/48VDC (18~72VDC) redundant power inputs
IES5200-20T4F4GC-2LV
100M Copper Port
20
100M Fiber Port
4
Gigabit COMBO Port
4
Power Supply
2*24/48VDC (18~72VDC) redundant power inputs
IES5200-22T2F4GC-2LV
100M Copper Port
22
100M Fiber Port
2
Gigabit COMBO Port
4
Power Supply
2*24/48VDC (18~72VDC) redundant power inputs
IES5200-24T4GC-2LV
100M Copper Port
24
100M Fiber Port
0
Gigabit COMBO Port
4
Power Supply
2*24/48VDC (18~72VDC) redundant power inputs
IES5200-8T16F4GC-2HV
100M Copper Port
8
100M Fiber Port
16
Gigabit COMBO Port
4
Power Supply
2*110/220VAC (85~264VAC/DC) redundant power inputs
IES5200-16T8F4GC-2HV
100M Copper Port
16
100M Fiber Port
8
Gigabit COMBO Port
4
Power Supply
2*110/220VAC (85~264VAC/DC) redundant power inputs
IES5200-20T4F4GC-2HV
100M Copper Port
20
100M Fiber Port
4
Gigabit COMBO Port
4
Power Supply
2*110/220VAC (85~264VAC/DC) redundant power inputs
IES5200-22T2F4GC-2HV
100M Copper Port
22
100M Fiber Port
2
Gigabit COMBO Port
4
Power Supply
2*110/220VAC (85~264VAC/DC) redundant power inputs
IES5200-24T4GC-2HV
100M Copper Port
24
100M Fiber Port
0
Gigabit COMBO Port
4
Power Supply
2*110/220VAC (85~264VAC/DC) redundant power inputs
Documentation & Downloads
Recommended Products
ICS5428 Series
28-port Gigabit /10Gigabit Layer 3 Industrial Ethernet Switch
ICS6420 Series
20-Port Gigabit/10Gigabit Layer 3 Industrial Ethernet Switch
MES5400 Series
30-port Gigabit/10Gigabit Modular Layer 3 Industrial Ethernet Switch
ICS5400TSN-24GT16GS4XS
44-Port Gigabit /10Gigabit Layer 3 TSN Industrial Ethernet Switch
Make an appointment with an expert to receive a free assessment of your industrial network needs










