IES7120 Series

20/24-Port 100M/Gigabit Layer 2 Managed Industrial Ethernet Switch

Support 12 100M copper ports, 4 100M fiber ports, and 4 Gigabit SFP slots, 14 100M copper ports, 2 100M fiber ports, and 4 Gigabit SFP slots, 16/20 100M copper ports, and 4 Gigabit SFP slots

Support MRP ring network, reconfiguration time < 200ms

Adopt Ring patented technology, support single ring, coupling ring, chain, Dual-homing function

Support multiple network protocols and industry standards, such as STP/RSTP/MSTP, MRP, ERPS, DHCP, VLAN, QoS, IGMP Snooping, LLDP, ACL and SNMP.

DC product supports 2 12/24/48VDC (9~60VDC), dual power supply redundancy, support anti-reverse connection

AC product supports 1 110/220VAC/DC power supply input

Support -40~75℃ wide operating temperature range

Introduction

The IES7120 series is a 20/24-port 100M/Gigabit layer 2 managed industrial Ethernet switch. This series provides 8 products and supports 100M copper port, 100M fiber port, and Gigabit SFP slot. They adopt DIN-Rail or wall mounting to meet the requirements of different application scenes.

Network management system supports a variety of network protocols and industry standards, such as IPv4, VLAN, STP/RSTP/MSTP, Ring, MRP, ERPS, DHCP, LLDP, IGMP Snooping, QoS, Modbus TCP monitoring, port trunking, port mirroring, etc. It has perfect management functions, supporting port configuration, port statistics, ACL, 802.1X authentication, network diagnosis, rapid configuration, online upgrade, etc. CLI, WEB, Telnet, SNMP, SSH, and other access methods can be supported. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

DC power supply input consists of two independent power supply circuits, which can ensure device’s normal operation when one fails. The design of DIP switch could implement device factory setting recovery and restart. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, new energy, rail transit, intelligent manufacturing, smart city, and other industrial fields.

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3u for 100Base-FX

IEEE 802.3z for 1000Base-X

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE802.1p for CoS

IEEE 802.1X for 802.1X Authentication

IEEE 802.1AB for LLDP

ITU-T G.8032 for ERPS

IEEE 802.3ad for LACP

Management

SNMP v1/v2c/v3, RMON, LLDP, PoE, QoS, DHCP Server, DHCP Snooping, port settings, dynamic/static MAC addresses, MAC/IPv4, storm suppression, user passwords, file management, log management, port statistics, link flapping protection, Modbus TCP monitoring

Security

User Privilege Classification, Port and Power Alarm, SSH Configuration, HTTPS Configuration, Access Control, SNMP, RMON, Port Limit Control, Port Security, NAS, ACL, Ethernet Services, RADIUS Server Authentication, TACACS + Server Authentication, Port Alarm, Temperature Alarm, Power Supply Alarm, Network Load Alarm

Switch Function

802.1Q VLAN, link aggregation, static aggregation, flow control, LACP

Unicast / Multicast

Multicast filtering, IGMP Snooping

Redundancy Technology

STP/RSTP/MSTP, ERPS, Ring, MRP

Troubleshooting

Log record, port mirroring, Ping, Traceroute, network cable diagnosis, SFP DDM

Time Management

NTP, Time Zone Configuration

Interface

100M copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/half Duplex Mode, MDI/ MDI-X Autotunning

100M fiber port: 100Base-X, optional SC/ST/FC

Gigabit SFP: 1000Base-X SFP slot, support forced 100M

Console port: CLI command line management port (RS-232), RJ45

Alarm port: 2-pin 7.62mm pitch terminal blocks, support 1 relay alarm output, current carrying capacity is 5A@30VDC or 10A@125VAC

Indicator

Power indicator, running indicator, alarm indicator, interface indicator

Switch Property

l Transmission mode: store and forward

l MAC address: 8K

l Cache: 4.1Mbit

l Backplane bandwidth: 12.8Gbps

l Switch time delay: <10μs

Power Supply

Adopt 4-pin 7.62mm pitch terminal blocks

l DC product

2 12/24/48VDC (9~60VDC), dual power supply redundancy, support anti-reverse connection

l AC product

1 110/220VAC/DC power supply input

Power Consumption

ModelNo-loadFull-loadIES7120-12T4F4GS-2LV11.571W@48VDC12.96W@48VDCIES7120-12T4F4GS-HV8.9W@220VAC12.9W@220VACIES7120-14T2F4GS-2LV6.79W@48VDC11.15W@48VDCIES7120-14T2F4GS-HV6.3W@220VAC10.5W@220VACIES7120-16T4GS-2LV5.2W@48VDC9.6W@48VDCIES7120-16T4GS-HV4.7W@220VAC9.0W@220VACIES7120-20T4GS-2LV4.9W@48VDC9.6W@48VDCIES7120-20T4GS-HV5.1W@220VAC9.4W@220VAC

 

Working Environment

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%~95% (no condensation)

Mechanical Structure

Housing: IP40 protection, metal

Installation: DIN-Rail or wall mounting

Dimension (W x H x D): 70mm×160mm×130mm

Weight: 1.040kg

Industrial Standard

IEC 61000-4-2 (ESD, electronic static discharge), Level 4

l Air discharge: ± 15kV

l Contact discharge: ±8kV

 

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 4

l Power supply: ±4kV

l Ethernet interface: ±2kV

l Relay: ±4kV

 

IEC 61000-4-5 (Surge), Level 4

l Power supply: common mode ±4kV, differential mode ±2kV

l Ethernet port: common mode ±4kV, differential mode ±2kV

l Relay: common mode ±4kV, differential mode ±2kV

 

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-31

Vibration: IEC 60068-2-6

Authentication

CE, FCC, RoHS

Warranty

5 years


Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More