IES618-4D Series

Layer 2 Managed Industrial Ethernet Switch with 4 Serial Ports

Support 4 serial ports, 4 100M copper ports and 4 Ethernet fiber/copper ports

Adopt Ring patent technology, support single ring, coupling ring, chain ring, Dual-homing ring network function, automatic recovery time of network failure < 50ms

Support more than 10 serial port work modes such as RealCom, TCP Client, TCP Server, UDP Server and UDP Client

Support 12~48VDC dual power input and power supply nonpolarity

Support -40~75℃ wide operating temperature range

Introduction

Support 4 serial ports, 4 100M copper ports and 4 Ethernet fiber/copper ports
Adopt Ring patent technology, support single ring, coupling ring, chain ring, Dual-homing ring network function, automatic recovery time of network failure < 50ms
Support more than 10 serial port work modes such as RealCom, TCP Client, TCP Server, UDP Server and UDP Client
Support 12~48VDC dual power input and power supply nonpolarity
Support -40~75℃ wide operating temperature range

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX and 100Base-FX

IEEE 802.3x for Flow Control

IEEE 802.1D-2004 for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

Management

Console/Telnet/WEB management method, SNMP v1/v2c Centralized Management of Equipment, Port Mirroring, QoS, File Management, Port Statistics, LLDP

Security

Classification of User Permissions, Port Alarm, Power Alarm, Threshold Alarm, Storm Suppression

Switch Function

802.1Q Vlan, Static Port Aggregation, Bandwidth Management, Flow Control

Unicast / Multicast

IGMP snooping

Redundancy Technology

Ring, STP/RSTP

Serial Server Function

4 serial port servers, each serial port server supports 4 TCP or UDP session connections; Multiple working modes: TCP Server, TCP Client, UDP, TCP auto, Realcom, Advanced TCP Server and advanced UDP

Interface

Copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/ MDI-X Autotunning

Fiber port: 100Base-FX, optional SC/ST/FC

Console port: CLI command line management port(RS-232), RJ45

Alarm port: 2-pin 7.62mm pitch terminal blocks, supporting 1 relay alarm output, the current load capacity is 1A@24VDC or 0.5A/120VAC

Serial Port

RS-485 signal: D+, D-, GND

RS-422 signal: T+, T-, GND, R+, R-

Baud rate: 600~921600bps

Data bit: 7bit, 8bit

Parity bit: None, Even, Odd

Stop bit: 1bit, 2bit

Interface form: 5-pin 5.08 mm pitch terminal blocks.

Load capacity: support 32 points polling (customizable 64 points)

Directional control: adopt automatic data direction control technology

Interface protection: 2KV isolation voltage, 15KV electrostatic protection

Indicator

Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator

Switch Property

Transmission mode: store and forward

MAC address: 16K

Cache: 4Mbit

Backplane bandwidth: 5.6G

Switch time delay: <10μs

Power Supply

12~48VDC, 4-pin 7.62mm pitch terminal blocks

Support dual power supply redundancy and non-polarity

Support built-in 4.0A overcurrent protection

Power Consumption

IES618-2F-4DI(RS-485) No-load: 6.9W@24VDC

IES618-2F-4DI(RS-485) Full-load: 7.8W@24VDC

Working Environment

Operating temperature: -40~75℃

Storage temperature:-40~85℃

Relative humidity: 5%~95% (no condensation)

Physical Characteristic

Housing: IP40 protection, high-strength corrugated metal

Installation: DIN-Rail or wall mounting

Dimension (W x H x D): 70mm×160mm×130mm

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

l Air discharge: ±8kV

l Contact discharge: ±6kV

 

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3

l Power supply: ±2kV

l Ethernet port: ±1kV

 

Shock: IEC60068-2-27

Free fall: IEC60068-2-23

Vibration: IES 60068-2-6

Authentication

CE, FCC, RoHS

Warranty

5 years


Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More