IES6100 Series

9-port 100M Layer 2 Managed Industrial Ethernet Switch

Support 6 100M Ethernet copper ports and 3 100M Ethernet fiber ports

Adopt Ring patent technology, support single ring, coupling ring, chain ring, Dual-homing ring network function, automatic recovery time of network failure < 50ms

Support 12/24/48VDC (9~60VDC), power supply redundancy, support anti-reverse connection

Support 220VAC/DC (85~264VAC/DC) power supply input and nonpolarity

Support -40~75℃ wide operating temperature range

Introduction

IES6100 series are layer 2 managed industrial Ethernet switches. This series provide 2 types of products and support different combination schemes of copper port and fiber port, which can meet the requirements of different application scenes.

Network management system supports various network protocols and industrial standards, such as STP/RSTP, 802.1Q VLAN, QoS Function, Port Trunking, Port Mirroring, LLDP, 802.1X. It also possesses complete management functions, including Port Configuration, Port Statistics, Access Control, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

DIP switch can achieve restoring factory defaults. When DC power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX and 100Base-FX

IEEE 802.3x for Flow Control

IEEE 802.1D-2004 for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.1AB for LLDP

IEEE 802.1X for 802.1X Authentication

Management

Console/Telnet/WEB management method, SNMP v1/v2c/v3 Centralized Management of Equipment, Port Mirroring, QoS, LLDP, File Management, Port Statistics

Security

User privilege classification, Relay Alarm (Port Alarm and Power Alarm), IEEE802.1X, Threshold Alarm, Loop Protection

Switch Function

802.1Q VLAN, Static Port Aggregation, Bandwidth Management, Flow Control

Unicast / Multicast

IGMP snooping

Redundancy Technology

Ring, STP/RSTP

Interface

Copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/ MDI-X Autotuning

Fiber port: 100Base-FX, optional SC/ST/FC

Console port: CLI command line management port (RS-232), RJ45

Alarm port: 6-pin 5.08mm pitch terminal blocks, relay occupies the right 2 pins, supporting 1 relay alarm output, the current load capacity is 1A@24VDC or 0.5A/120VAC

Indicator

Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator

Switch Property

Transmission mode: store and forward

MAC address: 4K

Cache: 2Mbit

Backplane bandwidth: 9.6Gbps

Switch time delay: <10μs

Power Supply

DC power supply:

l Power supply input: 12/24/48VDC (9~60VDC)

l Connection method: 6-pin 5.08mm pitch terminal blocks (including 4-pin power supply)

l Power supply quantity: dual power supply redundancy input

l Connection protection: built-in overcurrent protection, support anti-reverse connection

 

AC power supply:

l Power supply input: 220VAC/DC (85~264VAC/DC).

l Connection method: 6-pin 5.08mm pitch terminal blocks (includes 2-pin power supply)

l Number of power supply: single power supply input

l Connection protection: built-in overcurrent protection, support non-polarity

Power Consumption

IES6100-6T3F-2LV:

l No-load at normal temperature 25℃: 5.1W@48VDC

l Full-load at normal temperature 25℃: 5.2W@48VDC

l No-load at high temperature 75℃: 5.5W@48VDC

l Full-load at high temperature 75℃: 5.6W@48VDC

 

IES6100-6T3F-HV

l No-load at normal temperature 25℃: 4.58W@220VAC

l Full-load at normal temperature 25℃: 4.77W@220VAC

l No-load at high temperature 75℃: 4.83W@220VAC

l Full-load at high temperature 75℃: 5.05W@220VAC

Working Environment

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 0%~95% (no condensation)

Mechanical Structure

Housing: IP40 protection, high-strength corrugated metal

Installation: DIN-Rail or wall mounting

Dimension (W x H x D): 53mm×138mm×110mm

Weight:

IES6100-6T3F-2LV:0.625kg

IES6100-6T3F-HV:0.659kg

Industrial Standard

IEC 61000-4-2 (ESD), Level 4

l Air discharge: ± 15kV

l Contact discharge: ±8kV

 

IEC 61000-4-4 (EFT),Level 4

l Power supply: ±4kV

l Ethernet interface: ±2kV

l Relay: ±2kV

 

IEC 61000-4-5 (Surge),Level 4

l Power supply: common mode ±4kV, differential mode ±2kV

l Ethernet port: common mode ±4kV, differential mode ±2kV

l Relay: common mode ±4kV, differential mode ±2kV

 

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-31

Vibration: IEC 60068-2-6

Authentication

CE, FCC, RoHS

Warranty

5 years


Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More