IES6210 Series

10-port 100M/Gigabit Layer 2 Managed Industrial PoE Ethernet Switch

Support 2 Gigabit Combo ports (SFP slot or RJ45), 8 100M copper ports (PoE optional)

Adopt Ring patented technology, support single ring, coupling ring, chain, Dual-homing, automatic recovery time of network failure < 20ms

The maximum power consumption of single-port PoE is 30W, the maximum PoE power consumption of 24VDC products is 120W, and the maximum PoE power consumption of 48VDC products is 240W

Support 4 optional power inputs: 24VDC, 48VDC, 12/24/48VDC and 220VAC/DC

Support -40~75℃ wide operating temperature range

Introduction

IES6210 series products are 10-port 100M/Gigabit layer 2 managed industrial Ethernet switches. This product provides 100M copper port (PoE optional) and Gigabit Combo port (SFP slot or RJ45), and the PoE power supply conforms to the protocol standard of IEEE802.3af/at. They also adopt DIN-Rail or wall mounting, which can meet the requirements of different scenes.

Network management system supports various network protocols and industrial standards, such as STP/RSTP, 802.1Q VLAN, QoS, LLDP, PoE Configuration, IGMP Static Multicast, Port Trunking, Port Mirroring, etc. It also possesses complete management functions, including Port Configuration, Port Statistics, Access Control, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

Support optional AC/DC power supply. The DC power input consists of two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. The design of DIP switch could implement device factory setting recovery. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3z for 1000Base-X

IEEE 802.3ab for 1000Base-T

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.3ad for LACP

IEEE 802.3af for PoE

IEEE 802.3at for PoE+

IEEE 802.1X for 802.1X Authentication

Management

SNMP v1/v2c Centralized Management of Equipment, Port Mirroring, PoE, QoS, LLDP, DHCP Client, File Management, Port Statistics

Security

Classification of User Permissions, Port Alarm, Power Alarm, Threshold Alarm, Storm Suppression

Switch Function

802.1Q VLAN, Static Port Aggregation, Bandwidth Management, Flow Control

Unicast / Multicast

Static Multicast, IGMP-Snooping

Redundancy Technology

SW-Ring, STP/RSTP

Time Management

SNTP

PoE

The maximum power of PoE single-port: 30W

The power supply pin of PoE: V+, V+, V-, V- correspond to Pin 1, 2, 3, 6

Interface

100M copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/half Duplex Mode, MDI/ MDI-X Autotuning

Combo port: 10/100/1000Base-T(X) or 1000Base-X

Console port: CLI command line management port, Type-C

Relay: 6-Pin 5.08mm pitch terminal blocks (relay occupies 2 pins), support 1 relay alarm output, current loading capacity is 1A@30VDC, 0.3A@125VAC or 6A@250VAC/30VDC

Indicator

Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator, PoE Indicator (only for PoE products)

Switch Property

Transmission mode: store and forward

MAC address: 4K

Cache: 2Mbit

Backplane bandwidth: 9.6Gbps

Switch time delay: <10μs

Power Supply

IES6210-8T2GC-2P48:

l Power input: 12/24/48VDC (9~60VDC)

l Connection method: 6-pin 5.08mm pitch terminal blocks (including 4-pin power supply)

l Power supply quantity: dual power supply redundancy input

l Connection protection: 3A overcurrent protection, support anti-reverse connection

 

IES6210-8T2GC-P220:

l Power input: 220VAC/DC (85~264VAC/DC)

l Connection method: 6-pin 5.08mm pitch terminal blocks (including 4-pin power supply)

l Number of power supply: single power supply input

l Connection protection: support non-polarity

 

IES6210-8P2GC-2P24-120W:

l Power input: 24VDC

l Connection method: 6-pin 5.08mm pitch terminal blocks (including 4-pin power supply)

l Power supply quantity: dual power supply redundancy input

l Connection protection: 3A overcurrent protection, support anti-reverse connection

 

IES6210-8P2GC-2P48-240W:

l Power input: 48VDC (44~57VDC)

l Connection method: 6-pin 5.08mm pitch terminal blocks (including 4-pin power supply)

l Power supply quantity: dual power supply redundancy input

l Connection protection: 3A overcurrent protection, support anti-reverse connection

Power Consumption

IES6210-8T2GC-2P48:

No-load at normal temperature 25℃: 2.52W@48VDC

Full-load at normal temperature 25℃: 4.16W@48VDC

No-load at high temperature 75℃: 2.87W@48VDC

Full-load at high temperature 75℃: 4.50W@48VDC

 

IES6210-8T2GC-P220:

No-load at normal temperature 25℃: 2.30W@220VAC

Full-load at normal temperature 25℃: 4.05W@220VAC

No-load at high temperature 75℃: 2.53W@220VAC

Full-load at high temperature 75℃: 4.30W@220VAC

 

IES6210-8P2GC-2P24-120W:

No-load at normal temperature 25℃: 3.24W@24VDC

Full-load at normal temperature 25℃: 122.5W@24VDC (with PoE load)

No-load at high temperature 75℃: 3.56W@24VDC

Full-load at high temperature 75℃: 123.5W@24VDC (with PoE load)

 

IES6210-8P2GC-2P48-240W:

No-load at normal temperature 25℃: 3.4W@48VDC

Full-load at normal temperature 25℃: 225.5W@48VDC (with PoE load)

No-load at high temperature 75℃: 3.73W@48VDC

Full-load at high temperature 75℃: 228.3W@48VDC (with PoE load)

Working Environment

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%~95% (no condensation)

Mechanical Structure

Housing: IP40 protection, metal

Installation: DIN-Rail or wall mounting

Dimension (W x H x D): 53mm×138mm×110mm

Weight:

l IES6210-8T2GC-2P48: 0.651kg

l IES6210-8T2GC-P220: 0.690kg

l IES6210-8P2GC-2P24-120W: 0.694kg

l IES6210-8P2GC-2P48-240W: 0.667kg

Industrial Standard

IES6210-8T2GC-2P48:

IEC 61000-4-2 (ESD, electrostatic discharge), Level 4

l Air discharge: ±15kV

l Contact discharge: ±8kV

 

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 4

l Power supply: ±4kV

l Ethernet port: ±2kV

l Relay: ±4kV

 

IEC 61000-4-5 (Surge), Level 4

l Power supply: common mode ±4kV, differential mode ±2kV

l Ethernet port: common mode ±4kV, differential mode ±2kV

l Relay: common mode ±4kV, differential mode ±2kV

 

IES6210-8T2GC-P220, IES6210-8P2GC-2P24-120W, IES6210-8P2GC-2P48-240W:

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

l Air discharge: ±8kV

l Contact discharge: ±6kV

 

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3

l Power supply: ±2kV

l Ethernet port: ±1kV

l Relay: ±2kV

 

IEC 61000-4-5 (Surge), Level 3

l Power supply: common mode ±2kV, differential mode ±1kV

l Ethernet port: common mode ±2kV, differential mode ±1kV

l Relay: common mode ±2kV, differential mode ±1kV

 

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-31

Vibration: IEC 60068-2-6

Authentication

CE, FCC, RoHS

Warranty

5 years


Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More