SW485GI

Wall Mounting
Industrial RS-232/485/422 Converter and RS-485/422 Relay (2-in-1)

Support bidirectional data conversion between 1 RS-232 serial port and 1 RS-485/422 serial port

Support RS-485/422 repeater function, centralized relay function and data bidirectional conversion in one

One end of the RS-485/422 serial port uses an independent external power supply, and the other end uses DC/DC isolation conversion to provide power, and provides signal 3kV photoelectric isolation

Using "pre-emphasis" technology, the communication distance can reach up to 3000 meters (9600bps)

The serial port provides 1500W surge protection and 15kV static protection

Support 12~36VDC wide voltage input

Support -40~75℃ wide operating temperature range

Introduction

SW485GI is an industrial interface converter device that integrates RS-232 and RS-485/422 bidirectional conversion and RS-485/422 relay. It can achieve data bidirectional conversion between RS-232 and RS-485/422 serial ports, or serve as a relay for RS-485 and RS-422 transmission. The product supports 1 RS-232 serial port and 2 RS-485/422 serial ports, and RS-485/422 supports serial self-adaption technology. Without switch setting, it can automatically recognize RS-485/422 serial port. The serial port has 1500W surge protection, 15kV electrostatic protection, and 3kV photoelectric isolation protection, which can effectively protect equipment from damage. It adopts wall mounting, which can meet the requirements of different application scenes.

Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can adapt to the industrial scene environment with harsh requirements for EMC. It can be widely used in power systems, industrial automation control, IC card charging systems, and measuring instruments.

Technical Specifications

Serial Port

Standard: EIA RS-232C, RS-485, RS-422

Quantity of serial port: 1 RS-232 serial port, 2 RS-485/422 serial ports

Conversion mode: RS-232 and RS-485/422 data conversion, RS-485/422 relay (two modes cannot work at the same time)

RS-232 signal: TXD, RXD, GND

RS-485 signal: D+, D-, GND

RS-422 signal: T+, T-, R+, R-, GND

Baud rate: 300bps~115200bps

Interface form: RS-232 serial port, adopt DB9, Female; RS-485/422 serial port, adopt 5-pin 5.08mm pitch terminal blocks

Transmission distance: RS-232 serial port, 15m; RS-485/422 serial port, 3000m (9600bps)

Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC) technology to automatically identify and control data transmission direction

Load capacity: RS-485 supports 32 points polling (customizable 128 points)

Interface protection: 1500W surge protection, 15kV electrostatic protection

photoelectric isolation: 3kV

Indicator

Power indicator, serial port transmission and receiving data indicator

Power Supply

12~36VDC, 3-pin 5.08mm pitch terminal blocks

Power Consumption

Normal temperature no-load:

0.2W@12VDC

0.2W@24VDC

0.2W@36VDC

Normal temperature full-load:

0.3W@12VDC

0.3W@24VDC

0.3W@36VDC

High temperature full load:

0.3W@12VDC

0.3W@24VDC

0.3W@36VDC

Working Environment

Operating temperature: -40~75℃

Storage temperature :-40~75℃

Relative humidity: 5%~95% (no condensation)

Mechanical Structure

Shell: Metal shell, IP40 protection

Installation: wall mounting

Dimension (W x H x D): 69mm×22mm×100mm

Weight: 170g

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3

Power supply: ±2kV

Serial port: ±1kV

IEC 61000-4-5 (Surge), Level 3

Power supply: ±2kV

Serial port: ±1kV

Insulation resistance: >20MΩ (500VDC)

Dielectric strength: <5mA (500VAC)

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Authentication

CE, FCC, RoHS

Warranty

3 years

Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More