SW485A
Passive Pocket RS-232 to RS-485 Interface Converter with High Sensitivity
Support bidirectional data conversion between 1 RS-232 serial port and 1 RS-485 serial port
Serial port has high sensitivity of receiving
Unique port-power technology, no need for external power supply
Low power consumption, equal to that of normal light-emitting diodes in static operation, can be truly called passive
Automatic serial port signal rate detection , zero-delay automatic forwarding
Serial port provides 600W surge protection and 15kV electrostatic protection
Support -40~80℃ wide operating temperature range
Introduction
SW485A is an industrial-grade pocket RS-232 to RS-485 interface converter with high sensitivity, which can implement bidirectional data conversion between serial port RS-232 and RS-485 and need no external power supply. It provides a RS-232 and a RS-485 serial port equipped with 600W surge protection and 15kV electrostatic protection, which can effectively prevent device from being damaged.
The RS-232 port of SW485A adopts hole-type DB9 interface, which could connect to PC directly and obtain power from PC serial port via TXD, RTS and DTR signal line. SW485A can obtain enough power from those data/handshake signals regardless of whether the signal is high or low.
The design index of SW485A fully complies with the requirements of industrial standard. It’s receiving sensibility ranks top among its kind, which particularly suits for industrial system with requirement in fast collecting speed and large amount of data.
Technical Specifications
Serial Port | Standard: EIA RS-232C, RS-485 Serial port quantity: 1 RS-232 serial port, 1 RS-485 serial port RS-232 signal: TXD, RXD, GND RS-485 signal: D+, D-, GND Interface type: RS-232 serial port, adopts DB9, Female; RS-485 serial port, adopts 4-pin 5.08mm pitch terminal blocks Transmission distance: RS-232 serial port, 15m; RS-485 serial port, 1200m Direction control: RS-485 adopts automatic data flow control technology which can detect and control data transmission direction automatically Load capacity: RS-485 supports 32-point polling environment (128-point could be customized) Interface protection: 600W surge protection, 15kV electrostatic protection |
Power Requirement | No power supply; Obtain power from TXD, RTS, DTR signals of RS-232 serial port |
Power Consumption | Static power consumption: ≤10mA Dynamic power consumption(mean): ≤40mA |
Environmental Limit | Operating temperature: -40~80℃ Storage temperature: -40~85℃ Relative humidity: 5%~95% (no condensation) |
Physical Characteristic | Housing: plastic Dimension (W x H x D): 71mm×33mm×16.5mm Weight: 30g |
Certification | CE, FCC, RoHS |
Warranty | 3 years |
Ordering Information
Documentation & Downloads
Recommended Products
TLC422 Series
Passive Pocket RS-232 to RS-422 Interface Converter
SW485WA
Passive Pocket RS-232 to RS-485 Interface Converter with Photoelectric Isolation
SW485C
Passive Pocket RS-232 to RS-485/422 Interface Converter
MODEL485P
Wall Mounting
RS-232 to RS-485/422 Interface Converter
Make an appointment with an expert to receive a free assessment of your industrial network needs










