SW485WA
Passive Pocket RS-232 to RS-485 Interface Converter with Photoelectric Isolation
Support bidirectional data conversion between 1 RS-232 serial port and 1 RS-485 serial port
Support 1500V photoelectric isolation
Unique port-power technology, no need for external power supply
The rate is up to 38400bps, support 128 nodes
Automatic serial port signal rate detection, zero-delay automatic forwarding
Support -40~80℃ wide operating temperature range
Compact size, easy installation
Introduction
SW485WA is an industrial-grade pocket RS-232 to RS-485 interface converter, which can implement bidirectional data conversion between serial port RS-232 and RS-485, and provide 1500V photoelectric isolation protection without the need of external power supply. It provides a RS-232 serial port and a RS-485 serial port equipped with 600W surge protection and 15kV electrostatic protection, which can effectively prevent device from being damaged.
The RS-232 port of SW485WA adopts hole-type DB9 interface, which could connect to PC directly and obtain power from PC serial port via TXD, RTS and DTR signal lines. RS-232/485 bidirectional conversion could be implemented, even though it’s only powered by TXD signal. Regardless of whether the signal is high or low, SW485WA can obtain enough power from those data/handshake signals.
The design of SW485WA complies with the requirements of industrial standard. It could be wildly used in electric power system, industrial automation control and IC card charging system.
Technical Specifications
Serial Port | Standard: EIA RS-232C, RS-485 Serial port quantity: 1 RS-232 serial port, 1 RS-485 serial port RS-232 signal: TXD, RXD, GND RS-485 signal: D+, D-, GND Interface type: RS-232 serial port, adopts DB9, Female; RS-485 serial port, adopt 3-pin terminal blocks Transmission distance: RS-232 serial port, 15m; RS-485 serial port, 1200m Direction control: RS-485 adopts automatic data flow control technology which can detect and control data transmission direction automatically Load capacity: RS-485 supports 128-point polling environment Interface protection: 600W surge protection, 15kV electrostatic protection Photoelectric isolation: 1500V |
Power Requirement | No need for external power supply; Device obtains power from TXD, RTS, DTR signals of RS-232 serial port |
Power Consumption | Static power consumption: ≤20mA Dynamic power consumption(mean): ≤50mA |
Environmental Limit | Operating temperature: -40~80℃ Storage temperature: -40~85℃ Relative humidity: 5%~95% (no condensation) |
Physical Characteristic | Housing: plastic Dimension (W x H x D): 82mm×33mm×16.5mm Weight: 50g |
Certification | CE, FCC, RoHS |
Warranty | 3 years |
Ordering Information
Documentation & Downloads
Recommended Products
TLC422 Series
Passive Pocket RS-232 to RS-422 Interface Converter
SW485C
Passive Pocket RS-232 to RS-485/422 Interface Converter
SW485A
Passive Pocket RS-232 to RS-485 Interface Converter with High Sensitivity
MODEL485P
Wall Mounting
RS-232 to RS-485/422 Interface Converter
Make an appointment with an expert to receive a free assessment of your industrial network needs










