MODEL1100 Series
2-port 100M Media Converter
Support 1 100M copper port and optional 1 100M 1×9 fiber port or 1 100M SFP slot
Support 220VAC/DC, -48VDC built-in power supply, and 5VDC external power supply
Support -10~60℃ wide operating temperature range
Introduction
MODEL1100 series are 2-port 100M media converters, which can convert Ethernet electrical signal into Ethernet optical signal. This can extend transmission distance, and has great isolation protection and data security. This series has 4 different products, provides 100M copper ports, 100M 1×9 fiber ports and 100M SFP slot and supports optional 5VDC, -48VDC or 220VAC/DC power supply. They adopt wall or DIN-Rail mounting to meet the requirements of different application scenes.
This product conforms to CE and FCC certification standards. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements.
Technical Specifications
Standard & Protocol | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX |
Copper Port; | 10/100Base-T(X), RJ45, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning |
Fiber Port | Standard: 100Base-FX Connection: 1×9 fiber port (SC/ST/FC optional) or SFP slot (LC) optional
Transmission distance: l multimode: 2km l single mode: 20/40/60/80/100/120km
Fiber optical cable: l multimode: 50/125μm or 62.5/125μm; l single mode: 8.3/125μm, 8.7/125μm, 9/125μm or 10/125μm
Transmission wavelength: l multimode: 1310nm l single mode: 1310nm or 1550nm |
Indicator | Port indicator, Power indicator |
Power Supply | Support 3 power supply input schemes l External 5VDC, DC round head l Built-in 220VAC/DC, AC outlet with switch l Built-in -48VDC 3-pin 5.08mm pitch terminal blocks |
Power Consumption | No-load: 0.6W Full-load: 1.4W |
Working Environment | Operating temperature: -10~60℃ Storage temperature:-20~70℃ Relative humidity: 5%~95%(no condensation) |
Physical Characteristic | Shell: metal shell Installation: wall or DIN-Rail mounting Dimension (W x H x D): 70.6mm×26mm×94mm (external power supply) 115mm×30mm×173.2mm (built-in power supply) |
Certification | CE, FCC, RoHS |
Warranty | 3 years |
Ordering Information
Documentation & Downloads
Recommended Products
ICS5428 Series
28-port Gigabit /10Gigabit Layer 3 Industrial Ethernet Switch
ICS6420 Series
20-Port Gigabit/10Gigabit Layer 3 Industrial Ethernet Switch
MES5400 Series
30-port Gigabit/10Gigabit Modular Layer 3 Industrial Ethernet Switch
ICS5400TSN-24GT16GS4XS
44-Port Gigabit /10Gigabit Layer 3 TSN Industrial Ethernet Switch
Make an appointment with an expert to receive a free assessment of your industrial network needs










