IES2010 Series

10-Port 100M/Gigabit Layer 2 Unmanaged Industrial Ethernet Switch

Support 2 Gigabit fiber ports (SFP slot) and 8 optional 100M Ethernet fiber/copper ports

Gigabit bandwidth can realize transmitting large amounts of video, voice and data with high performance and high speed

DC Product supports dual power input, with input voltage of 12/24/48VDC (12~60VDC).

AC Product supports input voltage of 100~240VAC/DC

Support -40~75℃ wide operating temperature range

Introduction


IES2010 series are 10-port 100M/Gigabit layer 2 unmanaged industrial Ethernet switches. This series provides 4 products and supports a variety of interfaces including 100M copper ports, 100M fiber ports, and Gigabit SFP slots. They adopt DIN-Rail mounting or wall mounting to meet the requirements of different application scenes.

DC power supply input consists of two independent power supply circuits, which can ensure device’s normal operation when one fails. The design of DIP switch could implement device factory setting recovery. When DC power supply or port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX and 100Base-FX

IEEE 802.3z for 1000Base-X

IEEE 802.3ab for 1000Base-T

IEEE 802.3x for Flow Control

Interface

100M copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/ MDI-X Autotunning

100M fiber port: 100Base-FX, optional SC/ST/FC

SFP slot: 1000Base-X SFP

Console port: CLI command line management port (RS-232), RJ45

Alarm port: 2-pin 7.62mm pitch terminal blocks, support 1 relay alarm output

Indicator

Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator

Switch Property

Transmission mode: store and forward

MAC address: 4K

Cache: 2Mbit

Backplane bandwidth: 9.6G

Switch time delay: <10μs

Power Supply

DC power: 12/24/48VDC (12~60VDC), adopt 4-pin 7.62mm pitch terminal blocks, redundant dual power input, built-in overcurrent protection, support non-polarity

AC power: 100~240 VAC/DC, with built-in 5.0A overcurrent protection

Working Environment

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Mechanical Structure

Housing: IP40 protection, metal

Installation: DIN-Rail or wall mounting

Dimension (W x H x D): 53mm×138mm×110mm

Weight: 641g

DC Product

Industrial Standard

IEC 61000-4-2 (ESD, electronic static discharge), Level 4

l Air discharge: ± 15kV

l Contact discharge: ±8kV

 

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 4

l Power supply: ±4kV

l Ethernet interface: ±2kV

 

IEC 61000-4-5 (Surge), Level 4

l Power supply: common mode ±4kV, differential mode ±2kV

l Ethernet port: common mode ±4kV, differential mode ±2kV

 

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

AC Product

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

l Air discharge: ±8kV

l Contact discharge: ±6kV

 

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3

l Power supply: ±2kV

l Ethernet port: ±1kV

 

IEC 61000-4-5 (Surge), Level 3

l Power supply: common mode ±2kV, differential mode ±1kV

l Ethernet port: common mode ±2kV, differential mode ±1kV

 

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-31

Vibration: IEC 60068-2-6

Authentication

CE, FCC, RoHS

Warranty

5 years


Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More