IAP2600S Series

Wall Mounting or Pole Mounting
Industrial Outdoor Dual-band Wireless AP

Support 1 Gigabit PoE Combo/copper WAN port, 3/4 Gigabit copper LAN ports, 2 2.4G antenna interfaces and 2 5.8G antenna interfaces

Support 2.4GHz and 5.8GHz dual bands

WAN port supports 48VDC PoE power input

Support -40~75℃ wide operating temperature range

Introduction

IAP2600S series are Gigabit industrial outdoor dual-band wireless AP. This series provides two products, which support 1 Gigabit PoE copper WAN port or 1 Gigabit PoE Combo WAN port, 3/4 Gigabit copper LAN ports, 2 2.4G antenna interfaces and 2 5.8G antenna interfaces, and adopt wall-mounted or pole-holding installation mode, which can meet the needs of different application sites.

The network management system supports five operating modes including Route, AP, Bridge, Client and Dual-link, and IEEE802.11b/g/n/a/ac wireless technology. The highest rate of complete machine could reach 1167Mbps and meet the needs of quick data transmission. The device supports wireless encryption methods like WPA, WPA2, WPA3, etc. It also possesses SSID concealing, wireless user isolation, MAC address filtering, ARP binding, DMZ setting and other security strategies. Support virtual AP, that is, an AP device supports multiple SSID; supports single-link fast roaming and dual-link seamless roaming, that is, in the WLAN (Wireless Local Area Network) constituted by multiple AP, user can achieve fast roaming without conducting the switching operation.

RESET button can realize device reboot and one-key factory default restoration. All components are industrial grade, and the protection grade is IP68, which can adapt to the harsh outdoor environment. It can be widely used in rail transit, security, smart city, integrated pipe gallery, production automation, smart lamp pole and other industries.

Technical Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE802.11b/g/n/a/ac for WLAN

IEEE802.11i for wireless security

IEEE802.11r for fast roaming

IEEE802.3af/at for PoE

Working Mode

Route, AP, bridge, client, dual-link

Network Setting

Intranet Settings, wireless Settings, Wireless Probe, AC Management, SNMP Management, QoS Management

Firewall (Route Mode)

IP filtering, MAC filtering, URL filtering, port forwarding, ARP binding, DMZ setting

Radio Frequency

802.11b/g/n: 2.412GHz~2.4835GHz

802.11ac/n/a: 5.18GHz~5.825GHz

RF power output: 20dBm

Modulation methods: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM

Receiving Sensitivity

802.11n_HT40: -82dBm@MCS0, -64dBm@MCS7

802.11n_HT20: -85dBm@MCS0, -67dBm@MCS7

802.11g/a: -91dBm@6Mbps, -72dBm@54Mbps

802.11b: -93dBm@1Mbps, -87dBm@11Mbps

802.11ac: -84dBm@MCS0, -59dBm@MCS9

Transmitting Power

802.11n_HT40: 20dBm@MCS0, 20dBm@MCS7

802.11n_HT20: 20dBm@MCS0, 20dBm@MCS7

802.11g/a: 20dBm@6Mbps, 20dBm@54Mbps

802.11b: 20dBm@1Mbps, 20dBm@11Mbps

802.11ac: 20dBm@MCS0, 20dBm@MCS9

Interface

WAN port:

1 10/100/1000Base-T(X) RJ45port, support POE 48VDC input power supply;

1 Gigabit Combo port, supports dual-fiber LC flange interface or 10/100/1000 Base-T(X) RJ45 port, and copper port supports POE 48VDC power supply input;

LAN port: 3/4 10/100/1000Base-T(X) RJ45 port

Console port: CLI command management port (RS-232), RJ45

Antenna: 2 2.4G N-K type (Female) ports; 2 5.8G N-K type (Female) interface

Power Supply

POE 48VDC: support IEEE802.3af/at standard

Indicator

5.8G signal indicator, 2.4G signal indicator, WAN indicator, LAN indicator, running indicator, bridging signal strength indicator

Power Consumption

No-load: 5.4W@48VDC

Full-load: 10.2W@48VDC

Working Environment

Operating temperature: -40~75℃

Storage temperature:-40~85℃

Relative humidity: 5%~95%(no condensation)

Physical Characteristic

Housing: IP68 protection, metal

Installation: Wall mounting or pole mounting

Dimension (L × W × H): 275mm×76mm×245mm

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 4

Air discharge: ±15kV

Contact discharge: ±8kV


IEC 61000-4-4 (EFT, electrical fast transient), Level 4

Power supply: ±4kV

Ethernet port: ±2kV


IEC 61000-4-5 (Surge), Level 4

Power supply: common mode±4kV, differential mode±2kV

Ethernet interface: ±4kV


Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

MTBF

>250000 hours

Authentication

CE, FCC, RoHS

Warranty

5 years

Optional Accessories

Product Type

Product Number

Remark

2.4GHz(5dBi) omnidirectional fiberglass antenna, N-J type×1

3005040017

Optional

5.8GHz(5dBi) omnidirectional fiberglass antenna, N-J type×1

3005040019

Optional

2.4GHz(8dBi) omnidirectional fiberglass antenna, N-J type×1

3005040012

Optional

5.8GHz(8dBi) omnidirectional fiberglass antenna, N-J type×1

3005040013

Optional

2.4GHz(14dBi) directional panel antenna, N-K type×1

3005040010

Optional

5.8GHz(14dBi) directional panel antenna, N-K type×1

3005040011

Optional

5M outdoor waterproof WLAN RF cable, NJ-NK

3005040008

Optional

5M outdoor waterproof WLAN RF cable, NJ-NJ

3005040014

Optional

Make an appointment with an expert to receive a free assessment of your industrial network needs

Learn More