MES5400 Series
19-inch 1U Rack Mounting
30-port Gigabit/10Gigabit Modular Layer 3 Industrial Ethernet Switch
Support 1 embedded fixing: 10G daughter board (with 6*10G SFP+) and 3 expansion slots: Gigabit daughter board (support 8-port SFP daughter board or 8-copper-port daughter board)
Support IEC 62439-3 HSR/PRP high reliability seamless redundancy and parallel redundancy, and all ports support IEEE 1588v2 PTP
Support MRP ring network, reconfiguration time < 200ms
Support RIP, OSPF, VRRP, BGP and other routing protocols
Support IEC61850 MMS modeling and management, ensuring the efficient, reliable and standardized communication between substation devices
Support -40~75℃ wide temperature operation, support level 4 electromagnetic compatibility protection, and conform to IEC 61850-3 and IEEE 1613 (substation) standards
Support IP20 protection grade
Introduction
MES5400 series products are 1U rack-mounted 30-port Gigabit/10Gigabit modular layer 3 industrial Ethernet switches. This series of products provides fixed 10G daughter boards and extended Gigabit daughter boards, and the 10G daughter board supports 10G SFP+; Gigabit daughter board supports Gigabit SFP and Gigabit RJ45. Support power supply daughter board solutions of 2*48VDC or 2*110~240VAC/DC, and adopt standard rack installation method, which is specially designed for extremely severe electromagnetic interference environment to meet the anti-interference requirements of power monitoring industry.
Network management system supports various network protocols and industrial standards, such as Static Routing, RIP, VRRP, NAT, STP/RSTP/MSTP, PTP, HSR/PRP, GMRP, EPRS, 802.1Q VLAN, QoS, Modbus TCP function, DHCP Server, DHCP Client, IGMP Static Multicast, LLDP, Port Trunking, Port Mirroring, etc. It also possesses complete management functions, including Port Configuration, Port Statistics, Port IP Binding, Access Control, 802.1X Authentication, Network Diagnosis, Rapid Configuration, Online Upgrading and so on; and supports CLI, HTTP, HTTPS, Telnet, SSH and other access methods. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The hardware adopts fanless, low power consumption and wide temperature and voltage design, which has passed rigorous industrial standard tests, and suits the industrial scene environment with harsh requirements for EMC. It can be widely used in smart substation, smart grid, energy storage, photovoltaic, wind electricity, non-electric industry SCADA system and other industrial fields.
Technical Specifications
Standard & Protocol | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3ae for 10GBase-X IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol ITU-T G.8032 for ERPS IEEE 802.1Q for VLAN IEEE 802.1AB for LLDP IEEE 802.3ad for LACP IEEE1588v2 for PTP IEEE 802.1 AS for clock synchronization |
Management | SNMP v1/v2c/v3 centralized management devices, RMON, port mirroring, LLDP, DHCP Server, DHCP Relay, Modbus TCP monitoring, IEC61850 MMS, port speed limit, port isolation, port statistics, file management, online upgrade, log information, Syslog server |
Security | User privilege classification, ACL, SSH/HTTPS protocol authorization, link flapping protection, port loopback detection, access control, SNMP, RMON, IPDT, IPv6DT, Smart-Link, NAT, port alarm, temperature alarm, power alarm, network load alarm |
Switch Function | 802.1Q VLAN, MAC, static aggregation, LACP, ARP, storm suppression |
Unicast / Multicast | IGMP-Snooping, MLD-Snooping, GMRP, IGMP, MLD, PIM-SM, PIM-DM, IPv6-PIM-SM, IPv6-PIM-DM |
Redundancy Technology | Ring, MRP, STP/RSTP/MSTP, HSR/PRP, ERPS |
Routing Technique | RIP, RIPng, OSPF, OSPFv3, ISIS, VRRP, IPv6 VRRP, BGP |
Troubleshooting | Ping, Traceroute, Network Cable Diagnosis, DDMI |
Time Management | PTP, NTP Client, Time Zone Configuration |
Interface | 10Gigabit SFP+: 1G/2.5G/10G Base-X self-adaption or forced mode, SFP+ slot Gigabit SFP: 100/1000Base-X self-adaption or forced mode, SFP slot Gigabit copper port: 10/100/1000Base-T(X) self-adaption or forced mode, RJ45, Automatic Flow Control, Full/Half Duplex Mode self-adaption, MDI/MDI-X Autotuning CONSOLE: 2 CONSOLE ports, 1 RJ45 supporting CLI command line management port (RS-232); 1 Type-C supports CLI command line management port USB2.0: provide 1 Type-A USB 2.0 Female interface, and support external removable storage device Relay: Support 1 relay alarm output, adopt 3-pin 5.08mm pitch terminal blocks, the current carrying capacity is 2A@250VAC or 2A@30VDC |
Indicator | Power indicator, running indicator, alarm indicator, interface indicator |
Switch Property | Transmission mode: store and forward MAC address: 32K Cache: 24Mbit Backplane bandwidth: 110Gbps Switch delay: <10μs |
Power Supply | DC products: Power input: 2*48VDC power inputs, support hot plugging and anti-reverse connection Connection mode: adopt 2*3-pin 5.08mm pitch terminal blocks witch switch AC products: Power supply input: 2*220VAC (110~240VAC/DC) power inputs Connection mode: adopt 2 three-phase power socket with switch |
Power Consumption | DC products: No-load: 8.17W@48VDC Full-load: 14.41W@48VDC AC products: No-load: 7.65W@220VAC Full-load: 13.67W@220VAC |
Working Environment | Working temperature: -40~75℃; 10G port only supports -40~50℃ Storage temperature: -40~85℃ Relative humidity: 5%~95% (no condensation) |
Mechanical Structure | Housing: IP20 protection, metal Installation: 19-inch 1U rack mounting Dimension (W x H x D): MES5400-1U-MAIN-2LV: 482.6mm×44.1mm×320mm MES5400-1U-MAIN-2HV: 482.6mm×44.1mm×320mm MES5400-1U-8GS: 221.6mmx19.8mmx155.2mm MES5400-1U-8GT: 221.6mmx19.8mmx155.2mm Weight: MES5400-1U-MAIN-2LV: 5.020kg MES5400-1U-MAIN-2HV: 5.749kg MES5400-1U-8GS: 0.569kg MES5400-1U-8GT: 0.586kg |
Industrial Standard | IEC 61000-4-2 (ESD, electronic static discharge), Level 4 Air discharge: ±15kV Contact discharge: ±8kV IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 4 Power supply: ±4kV Copper port: ±2kV IEC 61000-4-5 (Surge), Level 4 Power supply: differential mode±2kV, common mode±4kV Copper port: differential mode±2kV, common mode±4kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-31 Vibration: IEC 60068-2-6 Overvoltage category: III Pollution level: 2 Insulation type: basic insulation |
Authentication | CE, FCC, RoHS, IEC 61850-3, IEEE 1613, KEMA |
Warranty | 5 years |
Ordering Information
MES5400-1U-MAIN-2LV
Total Ports
30
10Gigabit SFP+ Slot
6 embedded slots
Gigabit SFP Slot (optional)
Up to 24
Gigabit RJ45 Copper Port (optional)
Up to 24
Power Supply
2 x 48VDC
MES5400-1U-MAIN-2HV
Total Ports
30
10Gigabit SFP+ Slot
6 embedded slots
Gigabit SFP Slot (optional)
Up to 24
Gigabit RJ45 Copper Port (optional)
Up to 24
Power Supply
2 x 220VAC (110~240VAC/DC)
MES5400-1U-8GS
Type
Gigabit Ethernet daughter board
Specification
8*100/1000Base-X, SFP slot
Applicable Slot
M2/M3/M4
MES5400-1U-8GT
Type
Gigabit Ethernet daughter board
Specification
8*10/100/1000Base-T(X), RJ45
Applicable Slot
M2/M3/M4
Documentation & Downloads
Recommended Products
MES5300-28GS Series
19-inch 1U Rack Mounting
28-Port Full Gigabit Layer 2 Managed Industrial Ethernet Switch
MES5300-24GT4GS Series
19-Inch 1U Rack Mounting
28-Port Full Gigabit Layer 2 Managed Industrial Ethernet Switch
MES5200 Series
19-inch 1U Rack Mounting
28-port 100M/Gigabit Layer 2 Managed Industrial Ethernet Switch
MES5100-24T2S-2HV
19-inch 1U Rack Mounting
26-Port 100M Layer 2 Managed Industrial Ethernet Switch
Make an appointment with an expert to receive a free assessment of your industrial network needs










