MES6300 Series
DIN-Rail or Wall Mounting
16-Port Gigabit Layer 3 Managed Industrial Ethernet Switch
Support 8 Gigabit copper ports and 8 Gigabit SFP slots
Support MRP ring network, reconfiguration time < 200ms
Support multiple network protocols and industry standards, such as STP/RSTP/MSTP, ERPS, DHCP, VLAN, QoS, IGMP Snooping, LLDP, ACL and SNMP.
Support 2 24/48VDC (18~58VDC), dual power redundancy, and anti-reverse connection
Support 2 110VDC (85~300VDC) or 220VAC (90~264VAC) power supply, support non-polarity
Support -40~75℃ wide operating temperature range
Support IP40 protection grade
Introduction
MES6300 series products are 16-port Gigabit layer 3 managed industrial Ethernet switches. This series provides Gigabit copper port, Gigabit SFP slot, which can negotiate the port rate and duplex mode with the peer device through self-negotiation. The DC product supports a power supply solution of 18~58VDC, while the AC product offers optional power supply solutions of either 85~300VDC or 92~264VAC, and adopts DIN rail or wall-mounted installation methods, which can meet the needs of different application sites.
Network management system supports various network protocols and industrial standards, such as Static Routing, RIP, VRRP, NAT, STP/RSTP/MSTP, GMP, EPRS, 802.1Q VLAN, QoS, DHCP Server, DHCP Client, IGMP Static Multicast, LLDP, Port Trunking, Port Mirroring, etc. It also possesses complete management functions, including Port Configuration, Port Statistics, Port IP Binding, Access Control, 802.1X Authentication, Network Diagnosis, Rapid Configuration, Online Upgrading and so on; and supports CLI, HTTP, HTTPS, Telnet, SSH and other access methods, Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The RESET button of the device supports one-click restart and factory reset. The hardware adopts fanless, low power consumption and wide temperature design, which has passed rigorous industrial standard tests, and suits the industrial scene environment with harsh requirements for EMC. It can be widely used in smart substation, smart grid, energy storage, photovoltaic, wind electricity, non-electric industry SCADA system and other industrial fields.
Technical Specifications
Standard & Protocol | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3ae for 10GBase-X IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol ITU-T G.8032 for ERPS IEEE 802.1Q for VLAN IEEE 802.1AB for LLDP IEEE 802.3ad for LACP |
Management | SNMP v1/v2c/v3 centralized managed equipment, RMON, Port Mirroring, LLDP, QoS, DHCP Server, DHCP Relay, port speed limit, port isolation, port statistics, file management, online upgrade, log information, Syslog server |
Security | User privilege classification, ACL, SSH/HTTPS protocol authorization, link flapping protection, port loopback detection, access control, SNMP, RMON, IPDT, IPv6DT, Smart-Link, NAT, port alarm, temperature alarm, power alarm, network load alarm |
Switch Function | 802.1Q VLAN, MAC, static aggregation, LACP, ARP, storm suppression |
Unicast / Multicast | IGMP-Snooping, MLD-Snooping, GMRP, IGMP, MLD, PIM-SM, PIM-DM, IPv6-PIM-SM, IPv6-PIM-DM |
Redundancy Technology | Ring, MRP, STP/RSTP/MSTP, ERPS |
Routing Technique | RIP, RIPng, OSPF, OSPFv3, ISIS, VRRP, IPv6 VRRP, BGP |
Troubleshooting | Ping, Traceroute, Network Cable Diagnosis, SFP Digital Diagnosis |
Time Management | NTP Client, Time Zone Configuration |
Interface | Gigabit copper port: 10/100/1000Base-T(X) self-adaption or forced mode, RJ45, Automatic Flow Control, Full/Half Duplex Mode self-adaption, MDI/MDI-X Autotuning Gigabit SFP slot: 100/1000 Base-X SFP slot, auto-negotiation or forced mode Console port: CLI command line management port (RS-232), RJ45 Relay: Support 1 relay alarm output, adopt 2-pin 7.62mm pitch terminal blocks, the current carrying capacity is 1A@30VDC or 2A@250VAC |
Indicator | Power indicator, running indicator, alarm indicator, interface indicator |
Switch Property | Transmission mode: store and forward MAC address: 16K Cache: 12Mbit Backplane bandwidth: 128Gbps Switch delay: <10μs |
Power Supply | DC products: Power supply range: 24/48VDC (18~58VDC), dual power supply redundancy Connection mode: 5-pin 5.08mm pitch terminal blocks Connection protection: support anti-reverse connection AC products: Power supply range: 110VDC (85~300VDC) or 220VAC (90~264VAC), dual power supply Connection mode: 5-pin 5.08mm pitch terminal blocks Connection protection: support non-polarity |
Power Consumption | MES6300-8GT4GS-2LV: No-load at normal temperature 25℃: 6.36W@48VDC Full-load at normal temperature 25℃: 11.57W@48VDC No-load at high temperature 75℃: 8.18W@48VDC Full-load at high temperature 75℃: 13.60W@48VDC MES6300-8GT4GS-2HV: No-load at normal temperature 25℃: 5.10W@220VAC Full-load at normal temperature 25℃: 10.81W@220VAC No-load at high temperature 75℃: 6.82W@220VAC Full-load at high temperature 75℃: 12.24W@220VAC MES6300-8GT8GS-2LV: No-load at normal temperature 25℃: 8.64W@48VDC Full-load at normal temperature 25℃: 16.80W@48VDC No-load at high temperature 75℃: 9.62W@48VDC Full-load at high temperature 75℃: 18.24W@48VDC MES6300-8GT8GS-2HV: No-load at normal temperature 25℃: 6.88W@220VAC Full-load at normal temperature 25℃: 15.75W@220VAC No-load at high temperature 75℃: 8.34W@220VAC Full-load at high temperature 75℃: 16.74W@220VAC |
Working Environment | Operating temperature: -40~75℃ Storage temperature: -40~85℃ Relative humidity: 5%~95% (no condensation) |
Mechanical Structure | Housing: IP40 protection, metal Installation: DIN-Rail or wall mounting Dimension (W x H x D): 70mm×160mm×130mm Weight: MES6300-8GT4GS-2LV: 0.980kg MES6300-8GT4GS-2HV: 1.115kg MES6300-8GT8GS-2LV: 0.989kg MES6300-8GT8GS-2HV: 1.120kg |
Industrial Standard | IEC 61000-4-2 (ESD, electronic static discharge), Level 4 Air discharge: ± 15kV Contact discharge: ±8kV IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 4 Power supply: ±4kV Copper port: ±2kV IEC 61000-4-5 (Surge), Level 4 Power supply: differential mode±2kV, common mode±4kV Copper port: differential mode±2kV, common mode±4kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-31 Vibration: IEC 60068-2-6 |
Authentication | CE, FCC, RoHS |
Warranty | 5 years |
Ordering Information
MES6300-8GT4GS-2LV
Gigabit Copper Port
8
Gigabit SFP
4
Power Supply
24/48VDC (18~58VDC)
dual power supply redundancy
MES6300-8GT4GS-2HV
Gigabit Copper Port
8
Gigabit SFP
4
Power Supply
110VDC (85~300VDC) or 220VAC (90~264VAC)
dual power supply
MES6300-8GT8GS-2LV
Gigabit Copper Port
8
Gigabit SFP
8
Power Supply
24/48VDC (18~58VDC)
dual power supply redundancy
MES6300-8GT8GS-2HV
Gigabit Copper Port
8
Gigabit SFP
8
Power Supply
110VDC (85~300VDC) or 220VAC (90~264VAC)
dual power supply
Documentation & Downloads
Recommended Products
MES5300-28GS Series
19-inch 1U Rack Mounting
28-Port Full Gigabit Layer 2 Managed Industrial Ethernet Switch
MES5300-24GT4GS Series
19-Inch 1U Rack Mounting
28-Port Full Gigabit Layer 2 Managed Industrial Ethernet Switch
MES5200 Series
19-inch 1U Rack Mounting
28-port 100M/Gigabit Layer 2 Managed Industrial Ethernet Switch
MES5100-24T2S-2HV
19-inch 1U Rack Mounting
26-Port 100M Layer 2 Managed Industrial Ethernet Switch
Make an appointment with an expert to receive a free assessment of your industrial network needs










